3030 - V-Core4 Door

Wanted a door on my V-Core 4 instead of having to lift the front panel away everytime a print is finished.

Most Designs need some adjustment on the side panels as well.

My Design only needs new front panels. Rest stays the same.

Part List is for a V-Core 4 300. Used 4mm PC Panels.

For the other V-Core Sizes you just need to adjust the door Panel Size. Parts should work the same.

Holds shut by 2 Magnets on top and 1 Magnet on bottom.

All printed parts are PETG

0,2mm Layer Height

4 Walls

25% Infill

Used some minor supports on the frame part to get a nice screw hole.

Part List Hinges:

Amount Size Part Link

6 - Frame Part Printed

6 - Door Part Printed

6 M6x12 Cap Head Screw from RatRig Package

6 M6 T-Nut 3030 from RatRig Package

6 M3x50 Cap Head Screw https://www.amazon.de/sourcing-map-Gewinde-Innensechskant-Kopfschrauben/dp/B01FL88I36

12 M3x4 Heat Insert https://www.amazon.de/ruthex-Gewindeeinsatz-St%C3%BCck-Gewindebuchsen-Kunststoffteile/dp/B09ZHSGHXD

12 M3x8 Screw https://www.amazon.de/sourcing-map-Legierung-Schraube-Sechskantschraube/dp/B0143GZJI4

12 M3 Washer https://www.amazon.de/Unterlegscheiben-Beilagscheiben-Edelstahl-Karosseriescheiben-Gewindestange/dp/B0D95V4Z8F

Part List Handle:

Amount Size Part Link

2 - Alu Door Handle from RatRig Package

4 M6x16 Cap Head Screw from RatRig Package

4 M6 Locking Nut from RatRig Package

4 M6 Washer from RatRig Package

Part List Magnet Holder

Amount Size Part Link

4 - VC4 Magnet Panel from RatRig Package

2 - VC4 Magnet Frame from RatRig Package

1 - Magnet Holder Bottom Printed

10 M6x12 Cap Head Screw from RatRig Package

8 M6 Locking Nut from RatRig Package

8 M6 Washer from RatRig Package

12 10x4 Magnet Neodym disc from RatRig Package

2 M6 T-Nut 3030 from RatRig Package

- - Glue for bottom Magnet Holder -

Door:

2x VC4 300 Door - see DXF File