PrusaBox adapter for "MMU2S Buffer (inspired by RMU Buffer)"

PrusaBox adapter for "MMU2S Buffer (inspired by RMU Buffer)" — Image 2 of 5

PrusaBox adapter for "MMU2S Buffer (inspired by RMU Buffer)" — Image 3 of 5

PrusaBox adapter for "MMU2S Buffer (inspired by RMU Buffer)" — Image 4 of 5

3D model · Printables

PrusaBox adapter for "MMU2S Buffer (inspired by RMU Buffer)"

Platform: Printables
Price: Free
License: CC-BY-NC-SA; Non-commercial use only, with credit; share remixes under the same license.
Formats: STL3MFGCODE

10 Likes
70 Downloads
1 Makes
2 Comments
1 275 Views

Author:Posix

Published 2022-04-10

Download on

Printables

Description

I also designed a hinged version PrusaBox adapter hinged for "MMU2S Buffer (inspired by RMU Buffer)" so that you can also open the side door with minimal effort. I kept the original box hinge design language so that it does not appear that it does not belong on the box.

Following my MM2S assembly I had to mount some kind of buffer on my PrusaBox. The buffer I decided to use is MMU2S Buffer (inspired by RMU Buffer) .

This adapter will mount the buffer on the side of the PrusaBox on the two holes that already exist on the top cover for the inside spool holder mod.

My design was inspired by this , but it is a complete redesign from the ground up. So this is not a remix, and the part linked does not fit my buffer.

Filament

PETG or PLA

BOM

2x M4x10 Screws (Provided in the PrusaBox Kit) 2x M4 nuts (Provided in the PrusaBox Kit)

Print settings

Perimeters : 6 Layer height : 0.20 Infill pattern : Gyroid