Prusa Enclosure buffer adapter MMU2S/MMU3

This is a printable model for the Original Prusa Enclosure with the buffer of MMU2S/MMU3.

How to print

Use the default Prusa Slic3r Settings for PETG or ABS/ASA. No supports required. Printed with layer 0.2.

Parts to print

To use this model you have to print the following items:

- 1 unit of this model. - 4 units of this model: https://www.printables.com/es/model/634210-mmu3-short-buffer-holder Assembly

- Reemplace 2 upper Plate Holder with 2 Short Buffer Holder provided by the user @Collin_686284 - Install the nuts on the adapter. - Remove the two upper Plate Holders and two bottom Plate Holders from the buffer. - Install the 4 units of Short Buffer Holder provided by the user @Collin_686284 and attach the adapter provided at this design. Fix all parts of the buffer using the same screws. - Install the buffer with the new parts and adapter on the Original Prusa Enclosure. Credits and thanks

Thanks to @Collin_686284 for the part. If you like this desing, please give me a like and publish your print! Thanks! ;)