HueForge Princess Peach

***If you like what you see please give a “Like” and a “Follow”! The goal is to get over 200 followers!***

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA PolyLite Aqua Blue Transmission Distance: 2.5 PLA Kexcelled Fluorescent Red Transmission Distance: 4.5 PLA PolyLite Pink Transmission Distance: 3 PLA PolyLite White Transmission Distance: 5 PLA PolyTerra Pastel Peach Transmission Distance: 5 PLA PolyTerra Savannah Yellow Transmission Distance: 3.5 PLA PolyLite White Transmission Distance: 6

Swap Instructions: Start with Black At layer #17 (1.44mm) swap to Aqua Blue At layer #30 (2.48mm) swap to Fluorescent Red At layer #43 (3.52mm) swap to Pink At layer #44 (3.6mm) swap to White At layer #48 (3.92mm) swap to Pastel Peach At layer #48 (3.92mm) swap to Savannah Yellow At layer #50 (4.08mm) swap to White for the rest.