HueForge Mario in a Hoodie [Multicolor]

***If you like what you see please give a “Like” and a “Follow”! The goal is to get over 200 followers!***

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA PolyLite Azure Blue Transmission Distance: 3 PLA PolyTerra Arctic Teal Transmission Distance: 0.5 PLA PolyTerra Army Red Transmission Distance: 0.3 PLA PolyLite Wine Red Transmission Distance: 1 PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA PolyTerra Pastel Peach Transmission Distance: 5 PLA PolyLite White Transmission Distance: 5

Swap Instructions: Start with Black At layer #15 (1.28mm) swap to Azure Blue At layer #21 (1.76mm) swap to Arctic Teal At layer #23 (1.92mm) swap to Army Red At layer #38 (3.12mm) swap to Wine Red At layer #39 (3.2mm) swap to Charcoal At layer #40 (3.28mm) swap to Pastel Peach At layer #49 (4mm) swap to White for the rest.