Piezas para impresoras

Adjustable GPU Support Brackets: 3D Models to Print

This collection gathers 3D-printable brackets that hold a graphics card level inside a case, from plain threaded posts to decorative anti-sag stands and vertical mounts. Most designs are small, flat-printed parts, so they are an easy first project for a 3D printer. You can compare height ranges, mounting styles and part counts across the listings. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Esta colección está escrita en inglés, pero la búsqueda funciona en cualquier idioma.

Una colección de Polyzon · 48 modelos de 4 plataformas

Cómo se elabora esta colección

Polyzon reúne esta colección a partir de los resultados de búsqueda de las plataformas conectadas. Se eliminan los duplicados y los modelos sin vista previa, las coincidencias débiles van al final y el resto mantiene el orden de la búsqueda. Los modelos pertenecen a sus autores: consulta las condiciones en la página de cada modelo.

Criterios de selección: el equipo editorial de Polyzon · Texto actualizado el 13/10/2026

Ver la colección Mostrar todos: 1435 modelos →
Colección

Por dónde empezar

Todos los modelos de esta colección

Mostrar todos: 1435 modelos
Sobre la categoría

«Adjustable GPU Support Brackets: 3D Models to Print»

The models here split into a few groups. Adjustable posts and braces use a screw thread or sliding sections to set the height under the card's outer edge, while decorative brackets build the same function into a themed shape. Brand-oriented holders are shaped around common card and case lines, and vertical mounts or risers change the card's orientation instead of just propping it up. Mining-rig brackets are usually longer and wider to reach across several cards at once.

Before printing, measure the gap between the card's lower edge and the case floor or side panel, then check that the model's stated height range covers it with a little margin. Look at the number of parts and how they join, the thread pitch if screws are used, and whether the author notes that printed supports are needed. Material choice matters near a warm card, so read the settings the author lists, and look at photos of finished prints to judge the footprint and how the bracket sits against the card.

If the results feel narrow, try other words for the same idea: anti-sag brace, graphics card holder, GPU stand, card support post, or vertical mount. Related searches such as PC case accessories, cable management clips, fan ducts and mining rig frames often lead to models that solve the same problem in a different way. Combining a card name with the word bracket also surfaces variants shaped for a particular cooler or backplate.

A useful check is whether the bracket touches the card's backplate or its fan shroud, since that decides how the load is carried. Models that spread contact over a wider area tend to sit more steadily than a single thin post, and a base that matches the case surface keeps the part from sliding. If the height range is close to your measurement, a slightly taller model can often be trimmed or shimmed after printing.

FAQ

Preguntas frecuentes

How does an adjustable GPU support bracket work?
A post, arm or brace sits between the outer edge of the graphics card and the case floor or side panel. The height is set with a screw thread, a telescoping section or stacked parts, so the bracket takes the weight that would otherwise pull the card down.
What height range should I look for?
Measure the distance from the card's lower edge to the surface the bracket will rest on, then choose a model whose listed range covers that figure with some margin. Adjustable designs usually allow a few millimetres of fine tuning after assembly.
Which material works for a GPU support?
PLA is common for these small parts, while PETG or ABS and ASA are often chosen when the bracket sits close to a warm card. Check the material and settings the author lists on the model page and compare them with what your printer handles.
Do these brackets need printed supports?
It depends on the design. Many are modelled with flat bases and vertical threads so they print without them, but others have overhangs that need supports. The author's notes and photos of real prints are the quickest way to tell.
Relacionado
Herramientas y equipos

Video Card Stand 3D Models for Printing

323538 modelos
Gadgets

GPU Support Brackets: 3D Models and STL Files

285662 modelos
Electrónica

GPU Support Bracket 3D Models and STL Files

361689 modelos
Fandom

Warcraft GPU Support Bracket STL Models

3225 modelos
Fandom

GPU Support Brackets and Anti-Sag STL Models

2244 modelos
Electrónica

GPU Support Bracket STL Models for PC Builds

286321 modelos

Todas las categorías de modelos 3D

El catálogo completo de temáticas, del hogar al CNC, con búsqueda en todas las plataformas conectadas.

Abrir el catálogo de categorías