Vehículos

Heater Direction Slider 3D Models and STL Files

This collection gathers 3D models built around heater direction sliders: control knobs and levers, face plates, and air deflectors that redirect warm airflow. Most of them are small parts meant for 3D printing on a desktop 3D printer, often as a repair or an upgrade for an existing panel. The STL files vary widely in shape, so the useful work starts with matching dimensions rather than picking a look. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Esta colección está escrita en inglés, pero la búsqueda funciona en cualquier idioma.

Una colección de Polyzon · 48 modelos de 3 plataformas

Cómo se elabora esta colección

Polyzon reúne esta colección a partir de los resultados de búsqueda de las plataformas conectadas. Se eliminan los duplicados y los modelos sin vista previa, las coincidencias débiles van al final y el resto mantiene el orden de la búsqueda. Los modelos pertenecen a sus autores: consulta las condiciones en la página de cada modelo.

Criterios de selección: el equipo editorial de Polyzon · Texto actualizado el 15/10/2026

Ver la colección Mostrar todos: 5625 modelos →
Colección

Por dónde empezar

Todos los modelos de esta colección

Mostrar todos: 5625 modelos
Sobre la categoría

«Heater Direction Slider 3D Models and STL Files»

The models fall into a few groups. Slider knobs and levers sit on a control shaft and move through a slot; face plates and panels frame that slot and carry the markings; vent deflectors and airflow redirectors clip or stick onto a grille and change where the air goes. Clip-on shields and diffusers for fans or heater units belong to the same family but mount differently, usually over an opening rather than on a shaft.

When choosing a model, compare the dimensions and scale the author lists against the part you want to replace or adapt, and look at how many separate pieces it has and whether they assemble. Check whether the author notes supports, the material and settings used, and photos of real prints, since a sliding fit depends on clearances that a render does not show. Parts that sit close to a heater core or a warm duct see heat, so the material and wall thickness matter more than on a decorative print.

To widen the search, try the wording used around this hardware: HVAC control knob, blend door lever, heater control panel, air vent deflector, airflow redirector, fan diffuser, grille clip. Related topics such as dashboard trim, vent grilles and knob caps often surface models that fit the same job. If a result is close but not exact, look at the author's other uploads and at remixes of the same part.

FAQ

Preguntas frecuentes

What counts as a heater direction slider model?
It is usually the small part that moves or frames the airflow control on a heater or ventilation panel: a knob, a lever, a face plate, or a deflector that redirects the air. Some entries are scale miniatures of heating appliances rather than functional parts.
How do I find a slider that matches my control panel?
Measure the shaft, the slot and the panel opening, then compare those numbers with the dimensions given on the model page. Photos of printed parts and any notes about scaling help confirm the fit before you commit to a print.
Do these parts need supports?
It depends on the geometry: flat knobs and plates often print without them, while overhangs on clips and deflectors may need them. The author's page usually states whether supports were used and how the part was oriented.
Which material should I use near a heater?
Look at the material and settings the author lists and at how close the part sits to a warm duct or heater core. Heat exposure differs between a dashboard panel and a surface right next to the airflow, so treat the author's notes as the starting point.
Relacionado
Vehículos

Hyundai Accent Heater Slider 3D Models and STL Files

2582 modelos
Mascotas

Waterfall Slider 3D Models and STL Files

1737 modelos
Hogar

3D Models for Heater and Radiator Accessories

6419 modelos
Vehículos

3D Models for Citroën C4 Heater Flap Repairs

2193 modelos
Vehículos

Chery Car Cup Holder 3D Models and STL Files

581909 modelos
Vehículos

Toyota Avensis 3D models for clips and trim

528 modelos

Todas las categorías de modelos 3D

El catálogo completo de temáticas, del hogar al CNC, con búsqueda en todas las plataformas conectadas.

Abrir el catálogo de categorías