乗り物

Heater Direction Slider 3D Models and STL Files

This collection gathers 3D models built around heater direction sliders: control knobs and levers, face plates, and air deflectors that redirect warm airflow. Most of them are small parts meant for 3D printing on a desktop 3D printer, often as a repair or an upgrade for an existing panel. The STL files vary widely in shape, so the useful work starts with matching dimensions rather than picking a look. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

このコレクションの本文は英語で書かれています。検索自体はどの言語でも使えます。

Polyzonのコレクション · モデル48件 3サイトから収集

このコレクションの選定方法

このコレクションは、Polyzonが対応サイトの検索結果をもとに作成しています。重複やプレビューのないモデルは除外し、関連性の低いものは後ろに回し、それ以外は検索結果の順に並べています。モデルの権利は各作者にあります。利用条件は各モデルのページでご確認ください。

選定基準：Polyzon編集部 · 本文の更新日：2026年10月15日

コレクションを見る モデル5625件をすべて表示 →
コレクション

まずはここから

このコレクションのすべてのモデル

モデル5625件をすべて表示
カテゴリについて

«Heater Direction Slider 3D Models and STL Files»

The models fall into a few groups. Slider knobs and levers sit on a control shaft and move through a slot; face plates and panels frame that slot and carry the markings; vent deflectors and airflow redirectors clip or stick onto a grille and change where the air goes. Clip-on shields and diffusers for fans or heater units belong to the same family but mount differently, usually over an opening rather than on a shaft.

When choosing a model, compare the dimensions and scale the author lists against the part you want to replace or adapt, and look at how many separate pieces it has and whether they assemble. Check whether the author notes supports, the material and settings used, and photos of real prints, since a sliding fit depends on clearances that a render does not show. Parts that sit close to a heater core or a warm duct see heat, so the material and wall thickness matter more than on a decorative print.

To widen the search, try the wording used around this hardware: HVAC control knob, blend door lever, heater control panel, air vent deflector, airflow redirector, fan diffuser, grille clip. Related topics such as dashboard trim, vent grilles and knob caps often surface models that fit the same job. If a result is close but not exact, look at the author's other uploads and at remixes of the same part.

FAQ

よくある質問

What counts as a heater direction slider model?
It is usually the small part that moves or frames the airflow control on a heater or ventilation panel: a knob, a lever, a face plate, or a deflector that redirects the air. Some entries are scale miniatures of heating appliances rather than functional parts.
How do I find a slider that matches my control panel?
Measure the shaft, the slot and the panel opening, then compare those numbers with the dimensions given on the model page. Photos of printed parts and any notes about scaling help confirm the fit before you commit to a print.
Do these parts need supports?
It depends on the geometry: flat knobs and plates often print without them, while overhangs on clips and deflectors may need them. The author's page usually states whether supports were used and how the part was oriented.
Which material should I use near a heater?
Look at the material and settings the author lists and at how close the part sits to a warm duct or heater core. Heat exposure differs between a dashboard panel and a surface right next to the airflow, so treat the author's notes as the starting point.
関連
乗り物

Hyundai Accent Heater Slider 3D Models and STL Files

モデル2582件
ペット

Waterfall Slider 3D Models and STL Files

モデル1737件
暮らし・日用品

3D Models for Heater and Radiator Accessories

モデル6419件
乗り物

3D Models for Citroën C4 Heater Flap Repairs

モデル2193件
乗り物

Chery Car Cup Holder 3D Models and STL Files

モデル581909件
乗り物

Toyota Avensis 3D models for clips and trim

モデル528件

3Dモデルのカテゴリ一覧

暮らし・日用品からCNCまで、すべてのテーマをそろえたカタログ。対応サイトを横断して検索できます。

カテゴリ一覧を開く