Gadgets

3D Models for Phone and Tablet Stands to Print

This collection gathers 3D models for holding a phone or tablet upright on a desk, nightstand or counter. It covers simple fixed stands, folding designs and holders shaped like objects or characters. All of them are STL files meant for 3D printing at home or through a service. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Esta colección está escrita en inglés, pero la búsqueda funciona en cualquier idioma.

Una colección de Polyzon · 48 modelos de 4 plataformas

Cómo se elabora esta colección

Polyzon reúne esta colección a partir de los resultados de búsqueda de las plataformas conectadas. Se eliminan los duplicados y los modelos sin vista previa, las coincidencias débiles van al final y el resto mantiene el orden de la búsqueda. Los modelos pertenecen a sus autores: consulta las condiciones en la página de cada modelo.

Criterios de selección: el equipo editorial de Polyzon · Texto actualizado el 14/10/2026

Ver la colección Mostrar todos: 14052 modelos →
Colección

Por dónde empezar

Todos los modelos de esta colección

Mostrar todos: 14052 modelos
Sobre la categoría

«3D Models for Phone and Tablet Stands to Print»

The models differ mainly in how the device sits in them. Fixed stands hold the phone at one angle and are usually a single piece, while adjustable versions use a hinge, a sliding arm or a set of notches to change the tilt. Folding and print-in-place designs arrive as one part with moving sections already in position. Some entries are sized for tablets or e-readers rather than phones, and a few are shaped as chairs, shoes or figures, where the form matters more than the angle.

Before printing, open the author's page and read the listed dimensions: the slot width, the overall height and the thickness of the base decide whether your device fits and whether the stand stays upright. Check how many parts the model has and whether they need assembly or fasteners, and look at the print settings the author lists, such as layer height, wall count and infill. Photos of real prints show how the surface and the joints came out. If the model has thin arms or a hinge, a material with some flexibility behaves differently from a stiff one.

Search results widen quickly if you use other terms for the same object: phone holder, smartphone dock, tablet stand, desk cradle, charging dock or viewing stand. Adding a use case narrows the list, for example a stand for a nightstand, a kitchen counter, a car vent or a workbench. Related topics worth trying are cable organizers, headphone hooks and wall mounts, since these often share the same mounting ideas.

The angle you need depends on the task: a shallow tilt works for reading and video calls, a steeper one for typing or drawing on a touchscreen. If the stand will sit on a smooth surface, check whether the base has feet or a recess for rubber pads, and whether the model leaves room for a charging cable. For a tablet, weight matters more than for a phone, so a wider base and a deeper slot help. Printing a small test piece first is a cheap way to confirm the fit before committing to the full model.

FAQ

Preguntas frecuentes

What should I measure before printing a phone stand?
Measure the thickness and width of your device, including any case, and compare those numbers with the slot dimensions the author lists. Also check the total height and the footprint, since a tall stand with a narrow base can tip.
Do phone stand models need supports?
It depends on the geometry. Flat, one-piece stands are often designed to print without them, while overhanging arms, hinges and curved backs may need them. The author's page usually states this, along with the orientation used.
Which material works for a phone stand?
A rigid filament such as PLA or PETG is common for desk stands, since it holds its shape under a phone's weight. If the model has a thin clip or a living hinge, a filament that bends slightly may last longer.
Can the same model hold a tablet?
Some designs are drawn for both phones and tablets, with a wider slot and a longer base. If a model is sized only for a phone, a tablet may not fit or may make it unstable, so check the listed dimensions first.
Relacionado
Hogar

Phone Stand Holder 3D Models and STL Files

563814 modelos
Gadgets

Phone Stand and Tank Holder 3D Models

7316 modelos
Gadgets

3D Models for Phone Stands With a Girl Figure

578341 modelos
Gadgets

Guitar-Shaped Phone Stands: 3D Models and STL Files

5719 modelos
Gadgets

3D Models for Phone Stands and Human-Figure Holders

7181 modelos
Gadgets

Snake Phone Stand 3D Models and STL Files

7358 modelos

Todas las categorías de modelos 3D

El catálogo completo de temáticas, del hogar al CNC, con búsqueda en todas las plataformas conectadas.

Abrir el catálogo de categorías