Gadgets

PS Stand 3D Models: Console, Controller and Game Holders

This collection gathers STL files for stands and holders built around PlayStation hardware: vertical bases for consoles, racks for game cases, controller stands and charging docks. Most designs are simple shapes that print in a few hours and tidy up a shelf or desk. Because the models come from different authors, each one is worth checking against your own device before you start a 3D printer. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Esta colección está escrita en inglés, pero la búsqueda funciona en cualquier idioma.

Una colección de Polyzon · 48 modelos de 5 plataformas

Cómo se elabora esta colección

Polyzon reúne esta colección a partir de los resultados de búsqueda de las plataformas conectadas. Se eliminan los duplicados y los modelos sin vista previa, las coincidencias débiles van al final y el resto mantiene el orden de la búsqueda. Los modelos pertenecen a sus autores: consulta las condiciones en la página de cada modelo.

Criterios de selección: el equipo editorial de Polyzon · Texto actualizado el 11/10/2026

Ver la colección Mostrar todos: 488721 modelos →
Colección

Por dónde empezar

Todos los modelos de esta colección

Mostrar todos: 488721 modelos
Sobre la categoría

«PS Stand 3D Models: Console, Controller and Game Holders»

The range splits into a few clear groups. Vertical stands raise a console on its side and are usually shaped around one body revision, so a base drawn for a slim console differs from one drawn for an older or larger model. Game holders work as racks or trays that keep cases upright and ordered. Controller stands range from a single cradle to multi-slot versions that also hold pads from other systems, and some include a charging dock or a recessed seat for a cable. Handheld and accessory stands form a smaller group, covering docks for portable consoles and small mounts for cameras and motion controllers.

Before printing, compare the author's stated dimensions with your own measurements, since console revisions differ in width, depth and the position of ports. Look at how the stand carries weight: some designs rest the device on a flat shelf, others grip it at the sides or use a screw point, and that changes how much material and infill the part needs. Check whether the model needs supports, which way the author oriented it, and what material and layer height they list. Photos of real prints on the model page show how the surfaces and the joints between parts come out.

Search results for this topic mix several naming habits, so it helps to try synonyms: stand, holder, dock, base, bracket, rack, mount, tray. Adding the device type narrows things quickly — console, controller, game case, portable console, camera. Related terms such as vertical, slim, wall mount or desk organizer bring up designs that do not use the word stand at all. If you want a stand for more than one device, search by the controller or case type rather than by the console name, since many models are drawn to hold several at once.

FAQ

Preguntas frecuentes

What should I measure before printing a stand for a console?
Measure the width, depth and height of your exact console revision, and note where the ports and vents sit. Compare those numbers with the dimensions the author lists, because bases drawn for one revision often do not match another.
Do these stands need supports?
It depends on the shape: flat bases usually print without them, while angled cradles and overhanging clips may need them. The author's notes and photos of real prints are the quickest way to see how the model was oriented.
Can one stand hold several controllers or game cases?
Yes, multi-slot designs exist alongside single cradles. Check the number of slots and the spacing in the description, and confirm that the width of each slot matches the items you plan to store.
Which material works for a stand?
PLA and PETG are common choices for desk parts, and the author usually lists a material and settings on the model page. Thicker walls and moderate infill help parts that carry a console's weight.
Relacionado
Gadgets

PS5 3D Models: Stands, Holders and Helmets

103197 modelos
Gadgets

PlayStation Console and Disc Stand 3D Models

517551 modelos
Gadgets

PS Controller Stand 3D Models and STL Files

501020 modelos
Gadgets

PS4 Joystick Stand 3D Models and STL Files

522357 modelos
Gadgets

PS5 Stand 3D Models: Controller and Console STL Files

8361 modelos
Gadgets

PS4 Controller 3D Models and STL Files to Print

7547 modelos

Todas las categorías de modelos 3D

El catálogo completo de temáticas, del hogar al CNC, con búsqueda en todas las plataformas conectadas.

Abrir el catálogo de categorías