Herramientas y equipos

3D models of self-tapping screws and mounts

This collection gathers STL files built around self-tapping screws: cable holders, brackets, matching nuts and inserts, plus generators for custom threads. It is useful when a printed part has to be fixed to wood, plastic or a car interior with an ordinary screw. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Esta colección está escrita en inglés, pero la búsqueda funciona en cualquier idioma.

Una colección de Polyzon · 48 modelos de 6 plataformas

Cómo se elabora esta colección

Polyzon reúne esta colección a partir de los resultados de búsqueda de las plataformas conectadas. Se eliminan los duplicados y los modelos sin vista previa, las coincidencias débiles van al final y el resto mantiene el orden de la búsqueda. Los modelos pertenecen a sus autores: consulta las condiciones en la página de cada modelo.

Criterios de selección: el equipo editorial de Polyzon · Texto actualizado el 11/10/2026

Ver la colección Mostrar todos: 77587 modelos →
Colección

Por dónde empezar

Todos los modelos de esta colección

Mostrar todos: 77587 modelos
Sobre la categoría

«3D models of self-tapping screws and mounts»

Most entries fall into two groups. One covers printed parts that accept a screw — cable clips, wall brackets, battery mounts, angles and inserts for furniture. The other covers the screw itself or its counterpart: nuts, threaded holes and parametric generators where you set the diameter and pitch before exporting.

When choosing a model, open the author's page and read the listed dimensions: thread size, hole diameter, wall thickness and the number of separate parts. Look at whether the file expects supports, how the thread is oriented on the build plate, and which material and settings the author used. Photos of real prints show how the thread engages better than a render.

To widen the search, try related wording: screw holder, threaded insert, wall mount, cable clip, nut, bolt, or the size you need. Combining a fastening term with the object it holds — cable, battery, panel, furniture — usually narrows results faster than a single word.

FAQ

Preguntas frecuentes

Can a 3D printer reproduce a usable screw thread?
Yes, with a coarse pitch and enough clearance between the parts. Fine threads printed in the wrong orientation tend to come out rough, so check the orientation shown on the model page.
Which printed parts work with metal self-tapping screws?
Holders, brackets and inserts are usually designed around a metal screw that cuts into the printed plastic. The page should state the screw diameter and the pilot hole size.
How do I pick the right size for my screw?
Measure the screw diameter and length, then compare them with the dimensions listed by the author. If the hole is too tight, a slightly larger pilot hole is easier to adjust than a printed thread.
What material is used for load-bearing mounts?
Authors often list the filament they used and the wall count. Parts that carry weight benefit from more perimeters, and some designs are meant to be printed in a stronger material than standard PLA.
Relacionado
Herramientas y equipos

3D Models for Screw Sorting and Storage

69207 modelos
Herramientas y equipos

Organizer STL Files for Self-Tapping Screws

60027 modelos
Electrónica

Screw-Mount Cable Tie 3D Models and STL Files

12309 modelos
Herramientas y equipos

3D Models for Metabo Screwdriver and Bit Storage

4931 modelos
Herramientas y equipos

3D Models for Screw Storage Boxes and Sorters

204331 modelos
Herramientas y equipos

Cordless Tool Battery Mounts: 3D Models for Skadis Pegboards

127007 modelos

Todas las categorías de modelos 3D

El catálogo completo de temáticas, del hogar al CNC, con búsqueda en todas las plataformas conectadas.

Abrir el catálogo de categorías