Hogar

Skadis Power Bank Holders for 3D Printing

This collection gathers 3D printing files for hanging and storing power banks on Skadis pegboards, from slim cradles to full 18650 cases. It is useful if you want your charging gear off the desk and within reach. Most entries are small STL parts that print in a couple of hours. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Esta colección está escrita en inglés, pero la búsqueda funciona en cualquier idioma.

Una colección de Polyzon · 48 modelos de 4 plataformas

Cómo se elabora esta colección

Polyzon reúne esta colección a partir de los resultados de búsqueda de las plataformas conectadas. Se eliminan los duplicados y los modelos sin vista previa, las coincidencias débiles van al final y el resto mantiene el orden de la búsqueda. Los modelos pertenecen a sus autores: consulta las condiciones en la página de cada modelo.

Criterios de selección: el equipo editorial de Polyzon · Texto actualizado el 14/10/2026

Ver la colección Mostrar todos: 11846 modelos →
Colección

Por dónde empezar

Todos los modelos de esta colección

Mostrar todos: 11846 modelos
Sobre la categoría

«Skadis Power Bank Holders for 3D Printing»

The models fall into a few groups. Some are cradles shaped around one power bank body, so the fit depends on that exact shell. Others are open mounts or brackets that grip a range of rectangular packs, and a third group covers boxes for loose 18650 cells, sometimes with room for a protection board or a display window. A few are larger DIY builds where the case is only one part of a project.

Before printing, compare the internal dimensions on the model page with your own power bank, since a few millimetres decide whether it slides in or rattles. Check the hook or slot geometry against your board, the wall thickness where the part bends, and whether the author lists supports, material and orientation. Photos of real prints show more about fit than a render does.

If the results feel narrow, try the spelling variants people use — powerbank, power bank, battery holder, pegboard mount, wall bracket, charger holder. Related searches such as cable clips, phone stands, 18650 storage trays and pegboard hooks often turn up parts that work alongside a holder. Adding the board name plus the device type usually narrows the list fastest.

FAQ

Preguntas frecuentes

What do I need to measure before printing a Skadis power bank holder?
Measure your power bank's length, width and thickness, then compare them with the internal dimensions given on the model page. Also check the distance between the peg hooks and the thickness of your board.
Do these holders need supports?
It depends on the shape. Flat-backed cradles often print without them, while hooks, overhangs and enclosed cases may need them. The author's page usually states the orientation and whether supports are required.
Which material works for a pegboard holder?
Many people use PLA for indoor parts that carry light loads, and PETG where a little more flexibility helps the clips. Follow whatever material and settings the author lists, and check the photos of printed parts.
Can I adapt a holder to a different power bank?
Yes, if the file allows scaling or editing. Scaling changes the hook spacing as well, so check both the device fit and the board fit after adjusting.
Relacionado
Electrónica

3D Printed Power Bank Cases and STL Designs

40707 modelos
Hogar

IKEA Skadis 3D Models: Holders, Racks, Organizers

12724 modelos
Hogar

SKADIS 3D Models: Pegboard Accessories and Organizers

48118 modelos
Hogar

Skadis Holder 3D Models: STL Files for Pegboard Storage

580614 modelos
Vehículos

Ford Power 3D Models and STL Files for Printing

12514 modelos
Hogar

Skadis Shelf 3D Models and STL Files

3399 modelos

Todas las categorías de modelos 3D

El catálogo completo de temáticas, del hogar al CNC, con búsqueda en todas las plataformas conectadas.

Abrir el catálogo de categorías