Ev ve yaşam

Skadis Power Bank Holders for 3D Printing

This collection gathers 3D printing files for hanging and storing power banks on Skadis pegboards, from slim cradles to full 18650 cases. It is useful if you want your charging gear off the desk and within reach. Most entries are small STL parts that print in a couple of hours. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 4 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 14.10.2026

Koleksiyonu gör Tümünü göster: 11846 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 11846 model
Kategori hakkında

«Skadis Power Bank Holders for 3D Printing»

The models fall into a few groups. Some are cradles shaped around one power bank body, so the fit depends on that exact shell. Others are open mounts or brackets that grip a range of rectangular packs, and a third group covers boxes for loose 18650 cells, sometimes with room for a protection board or a display window. A few are larger DIY builds where the case is only one part of a project.

Before printing, compare the internal dimensions on the model page with your own power bank, since a few millimetres decide whether it slides in or rattles. Check the hook or slot geometry against your board, the wall thickness where the part bends, and whether the author lists supports, material and orientation. Photos of real prints show more about fit than a render does.

If the results feel narrow, try the spelling variants people use — powerbank, power bank, battery holder, pegboard mount, wall bracket, charger holder. Related searches such as cable clips, phone stands, 18650 storage trays and pegboard hooks often turn up parts that work alongside a holder. Adding the board name plus the device type usually narrows the list fastest.

FAQ

Sıkça sorulan sorular

What do I need to measure before printing a Skadis power bank holder?
Measure your power bank's length, width and thickness, then compare them with the internal dimensions given on the model page. Also check the distance between the peg hooks and the thickness of your board.
Do these holders need supports?
It depends on the shape. Flat-backed cradles often print without them, while hooks, overhangs and enclosed cases may need them. The author's page usually states the orientation and whether supports are required.
Which material works for a pegboard holder?
Many people use PLA for indoor parts that carry light loads, and PETG where a little more flexibility helps the clips. Follow whatever material and settings the author lists, and check the photos of printed parts.
Can I adapt a holder to a different power bank?
Yes, if the file allows scaling or editing. Scaling changes the hook spacing as well, so check both the device fit and the board fit after adjusting.
İlgili
Elektronik

3D Printed Power Bank Cases and STL Designs

40707 model
Ev ve yaşam

IKEA Skadis 3D Models: Holders, Racks, Organizers

12724 model
Ev ve yaşam

SKADIS 3D Models: Pegboard Accessories and Organizers

48118 model
Ev ve yaşam

Skadis Holder 3D Models: STL Files for Pegboard Storage

580614 model
Taşıtlar

Ford Power 3D Models and STL Files for Printing

12514 model
Ev ve yaşam

Skadis Shelf 3D Models and STL Files

3399 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç