Gadgets

Slider 3D Models: Fidget, Zipper and Rail STL Files

This collection gathers slider models for 3D printing, from handheld fidget sliders to zipper replacements and rail-mounted parts. The range is wide, so the main task is matching the mechanism to the job you have in mind. Many files include several moving parts, which makes them a useful exercise in tolerances on a 3D printer. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Esta colección está escrita en inglés, pero la búsqueda funciona en cualquier idioma.

Una colección de Polyzon · 45 modelos de 5 plataformas

Cómo se elabora esta colección

Polyzon reúne esta colección a partir de los resultados de búsqueda de las plataformas conectadas. Se eliminan los duplicados y los modelos sin vista previa, las coincidencias débiles van al final y el resto mantiene el orden de la búsqueda. Los modelos pertenecen a sus autores: consulta las condiciones en la página de cada modelo.

Criterios de selección: el equipo editorial de Polyzon · Texto actualizado el 14/10/2026

Ver la colección Mostrar todos: 21312 modelos →
Colección

Por dónde empezar

Todos los modelos de esta colección

Mostrar todos: 21312 modelos
Sobre la categoría

«Slider 3D Models: Fidget, Zipper and Rail STL Files»

The models fall into a few groups. Fidget sliders and clickers are small handheld pieces, often built around magnets or a snap action. Zipper sliders are replacement parts shaped around a specific zip size. Rail, chain and crash-bar sliders belong to machines and vehicles, while camera and phone sliders carry a device along a track. Lid sliders for cans and containers are simpler, mostly a single shaped piece.

Before printing, read the model page for dimensions and scale, the number of separate parts, and whether the author lists supports, hardware or magnets. Sliding parts depend on clearance, so the layer height, nozzle width and material the author used matter more than usual. Print orientation affects how smooth the track comes out, and photos of real prints show how the assembled piece behaves.

If the results are too narrow, try related wording: fidget, clicker, zipper pull, carriage, rail block or track. Adding the mechanism, such as magnetic or print-in-place, or the target object, such as a can lid or a camera, narrows things further. Related topics like flexi models and desk toys often turn up pieces with similar moving-part design.

FAQ

Preguntas frecuentes

What is a fidget slider?
It is a small handheld piece with a part that moves back and forth, often with magnets or a click stop. Most versions are printed as a few parts and assembled after printing.
Do slider models need extra hardware?
Some do. Magnets, screws, bearings or a metal pin are common, and the model page usually states which size is used. Check that list before starting a print.
How do I get a smooth sliding motion?
Clearance between the moving parts is the deciding factor. Follow the tolerances the author lists, keep the layer height consistent, and orient the track so it does not print against the bed.
Can a printed zipper slider replace a broken one?
It can if the dimensions match your zip. Measure the original slider and compare it with the sizes given on the model page, since zipper sizes vary between garments and bags.
Relacionado
Electrónica

Headphone Slider Replacement 3D Models and STL

3034 modelos
Hobbies y makers

Slider 3D models: fidget, rail and track STL files

12447 modelos
Juguetes y figuras

Magnetic Slider STL Models for 3D Printing

40183 modelos
Juguetes y figuras

3D Models of Slider Lures for Classic Wobblers

2958 modelos
Gadgets

ASUS ROG Ally 3D Models: Stands, Cases, Grips

2390 modelos
Gadgets

BIC J3 Lighter Sleeves and Shells: 3D Models

2267 modelos

Todas las categorías de modelos 3D

El catálogo completo de temáticas, del hogar al CNC, con búsqueda en todas las plataformas conectadas.

Abrir el catálogo de categorías