Pratik gereçler

Slider 3D Models: Fidget, Zipper and Rail STL Files

This collection gathers slider models for 3D printing, from handheld fidget sliders to zipper replacements and rail-mounted parts. The range is wide, so the main task is matching the mechanism to the job you have in mind. Many files include several moving parts, which makes them a useful exercise in tolerances on a 3D printer. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 45 model 5 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 14.10.2026

Koleksiyonu gör Tümünü göster: 21312 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 21312 model
Kategori hakkında

«Slider 3D Models: Fidget, Zipper and Rail STL Files»

The models fall into a few groups. Fidget sliders and clickers are small handheld pieces, often built around magnets or a snap action. Zipper sliders are replacement parts shaped around a specific zip size. Rail, chain and crash-bar sliders belong to machines and vehicles, while camera and phone sliders carry a device along a track. Lid sliders for cans and containers are simpler, mostly a single shaped piece.

Before printing, read the model page for dimensions and scale, the number of separate parts, and whether the author lists supports, hardware or magnets. Sliding parts depend on clearance, so the layer height, nozzle width and material the author used matter more than usual. Print orientation affects how smooth the track comes out, and photos of real prints show how the assembled piece behaves.

If the results are too narrow, try related wording: fidget, clicker, zipper pull, carriage, rail block or track. Adding the mechanism, such as magnetic or print-in-place, or the target object, such as a can lid or a camera, narrows things further. Related topics like flexi models and desk toys often turn up pieces with similar moving-part design.

FAQ

Sıkça sorulan sorular

What is a fidget slider?
It is a small handheld piece with a part that moves back and forth, often with magnets or a click stop. Most versions are printed as a few parts and assembled after printing.
Do slider models need extra hardware?
Some do. Magnets, screws, bearings or a metal pin are common, and the model page usually states which size is used. Check that list before starting a print.
How do I get a smooth sliding motion?
Clearance between the moving parts is the deciding factor. Follow the tolerances the author lists, keep the layer height consistent, and orient the track so it does not print against the bed.
Can a printed zipper slider replace a broken one?
It can if the dimensions match your zip. Measure the original slider and compare it with the sizes given on the model page, since zipper sizes vary between garments and bags.
İlgili
Elektronik

Headphone Slider Replacement 3D Models and STL

3034 model
Hobi ve kendin yap

Slider 3D models: fidget, rail and track STL files

12447 model
Oyuncaklar ve figürler

Magnetic Slider STL Models for 3D Printing

40183 model
Oyuncaklar ve figürler

3D Models of Slider Lures for Classic Wobblers

2958 model
Pratik gereçler

ASUS ROG Ally 3D Models: Stands, Cases, Grips

2390 model
Pratik gereçler

BIC J3 Lighter Sleeves and Shells: 3D Models

2267 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç