Herramientas y equipos

Pipe Clamp STL Models for 3D Printing

This collection gathers pipe clamp models made for 3D printing, from simple snap-on rings to parametric and modular designs. You will also find cable and conduit clips, wall mounts and quick-release variants. It is useful when you need to hold a pipe, hose or cable run in place and want a shape you can adapt to your own dimensions. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Esta colección está escrita en inglés, pero la búsqueda funciona en cualquier idioma.

Una colección de Polyzon · 48 modelos de 5 plataformas

Cómo se elabora esta colección

Polyzon reúne esta colección a partir de los resultados de búsqueda de las plataformas conectadas. Se eliminan los duplicados y los modelos sin vista previa, las coincidencias débiles van al final y el resto mantiene el orden de la búsqueda. Los modelos pertenecen a sus autores: consulta las condiciones en la página de cada modelo.

Criterios de selección: el equipo editorial de Polyzon · Texto actualizado el 12/10/2026

Ver la colección Mostrar todos: 79765 modelos →
Colección

Por dónde empezar

Todos los modelos de esta colección

Mostrar todos: 79765 modelos
Sobre la categoría

«Pipe Clamp STL Models for 3D Printing»

The models fall into a few groups. Fixed-diameter snap-on clamps close with one screw or a snap fit, parametric versions let you set the bore and wall thickness before exporting, and segmented or stackable rings build up larger diameters from repeated parts. Cable and conduit clips form a separate group, usually sized in metric steps and closed with a zip tie, an interlock or a screw. Wall and mount variants add a flat base or a bracket, which changes how the part sits on the build plate.

When choosing, open the author's page and read the stated bore range, the number of separate parts and whether any hardware is required. Check the material and layer height the author lists, and look at photos of real prints to judge how the clamp closes and how much clearance the screw or tie needs. On a snap-on ring, the gap and wall thickness matter more than the outer size, because a stiff material can crack at the hinge.

Search results widen quickly if you try the words used in different regions and trades: pipe clip, tube clamp, conduit saddle, rohrschelle, abrazadera. Adding a diameter or a thread size narrows the list, and related topics such as cable management, hose holders, wall mounts and printer frame brackets often lead to the same geometry. If nothing matches your pipe, look for parametric or customizable versions and set the dimensions yourself.

FAQ

Preguntas frecuentes

What is the difference between a pipe clamp and a cable clip?
A pipe clamp usually wraps a rigid pipe or conduit and is fixed with a screw or a snap fit, while a cable clip is smaller and often holds a bundle with a zip tie or an adhesive base. Both appear in this collection, and the choice depends on the load and how often you need to open it.
How do I pick the right diameter?
Measure the outer diameter of the pipe, hose or conduit rather than its nominal size, since wall thickness varies between materials. Then compare that number with the bore range stated on the model page and leave a little clearance for the material you print with.
Do these clamps need supports?
It depends on how the model is oriented. Flat-backed wall clamps often print without them, while rings standing upright may need support under the overhang or can be split into halves and joined after printing.
Can I scale a clamp to fit another pipe size?
Scaling changes every dimension at once, including wall thickness, screw holes and the gap that lets the clamp flex. A parametric model is usually a better route, because you can change the bore while keeping the walls and clearances as the author intended.
Relacionado
Herramientas y equipos

STL models for pipe clamps and conduit holders

3886 modelos
Herramientas y equipos

3D Models of Clamps and Clips for Printing

263483 modelos
Herramientas y equipos

3D Models of Clamps and Tool Holders to Print

266735 modelos
Herramientas y equipos

Rod Clamp STL Models for 3D Printing

5037 modelos
Herramientas y equipos

Spring Clamp 3D Models: STL Files for Printing

4427 modelos
Herramientas y equipos

Lever Clamp 3D Models: STL Files for Bikes and Workshops

3785 modelos

Todas las categorías de modelos 3D

El catálogo completo de temáticas, del hogar al CNC, con búsqueda en todas las plataformas conectadas.

Abrir el catálogo de categorías