工具与设备

Pipe Clamp STL Models for 3D Printing

This collection gathers pipe clamp models made for 3D printing, from simple snap-on rings to parametric and modular designs. You will also find cable and conduit clips, wall mounts and quick-release variants. It is useful when you need to hold a pipe, hose or cable run in place and want a shape you can adapt to your own dimensions. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

本合集的文字为英文，搜索本身支持任何语言。

Polyzon合集 · 48个模型 来自6个平台

合集是如何整理的

此合集由Polyzon根据已接入平台的搜索结果整理而成：去除重复项和没有预览图的模型，匹配度低的排在最后，其余按搜索结果顺序排列。模型归作者所有——请在各模型页面查看使用条款。

筛选规则：Polyzon编辑部 · 文字更新于2026年10月12日

查看合集 查看全部86680个模型 →
合集

从这里开始

合集中的全部模型

查看全部86680个模型
关于此分类

«Pipe Clamp STL Models for 3D Printing»

The models fall into a few groups. Fixed-diameter snap-on clamps close with one screw or a snap fit, parametric versions let you set the bore and wall thickness before exporting, and segmented or stackable rings build up larger diameters from repeated parts. Cable and conduit clips form a separate group, usually sized in metric steps and closed with a zip tie, an interlock or a screw. Wall and mount variants add a flat base or a bracket, which changes how the part sits on the build plate.

When choosing, open the author's page and read the stated bore range, the number of separate parts and whether any hardware is required. Check the material and layer height the author lists, and look at photos of real prints to judge how the clamp closes and how much clearance the screw or tie needs. On a snap-on ring, the gap and wall thickness matter more than the outer size, because a stiff material can crack at the hinge.

Search results widen quickly if you try the words used in different regions and trades: pipe clip, tube clamp, conduit saddle, rohrschelle, abrazadera. Adding a diameter or a thread size narrows the list, and related topics such as cable management, hose holders, wall mounts and printer frame brackets often lead to the same geometry. If nothing matches your pipe, look for parametric or customizable versions and set the dimensions yourself.

FAQ

常见问题

What is the difference between a pipe clamp and a cable clip?
A pipe clamp usually wraps a rigid pipe or conduit and is fixed with a screw or a snap fit, while a cable clip is smaller and often holds a bundle with a zip tie or an adhesive base. Both appear in this collection, and the choice depends on the load and how often you need to open it.
How do I pick the right diameter?
Measure the outer diameter of the pipe, hose or conduit rather than its nominal size, since wall thickness varies between materials. Then compare that number with the bore range stated on the model page and leave a little clearance for the material you print with.
Do these clamps need supports?
It depends on how the model is oriented. Flat-backed wall clamps often print without them, while rings standing upright may need support under the overhang or can be split into halves and joined after printing.
Can I scale a clamp to fit another pipe size?
Scaling changes every dimension at once, including wall thickness, screw holes and the gap that lets the clamp flex. A parametric model is usually a better route, because you can change the bore while keeping the walls and clearances as the author intended.
相关
工具与设备

STL models for pipe clamps and conduit holders

3886个模型
工具与设备

3D Models of Clamps and Clips for Printing

263483个模型
工具与设备

3D Models of Clamps and Tool Holders to Print

266735个模型
工具与设备

Rod Clamp STL Models for 3D Printing

5037个模型
工具与设备

Spring Clamp 3D Models: STL Files for Printing

4427个模型
工具与设备

Lever Clamp 3D Models: STL Files for Bikes and Workshops

3785个模型

全部3D模型分类

完整的主题目录：从家居日用到CNC，均可在已接入的来源平台中搜索。

查看分类目录