Música

Amplifier 3D Models: Docks, Cases and Stands

This collection covers 3D models connected to amplifiers: passive phone docks, enclosures for small boards, stands and holders, and parts for 12 V builds. Each entry leads to a page where the author describes the parts, dimensions and settings, which matters when you print on an FDM 3D printer. It works as a starting point for a home audio project rather than a finished product list. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Esta colección está escrita en inglés, pero la búsqueda funciona en cualquier idioma.

Una colección de Polyzon · 40 modelos de 2 plataformas

Cómo se elabora esta colección

Polyzon reúne esta colección a partir de los resultados de búsqueda de las plataformas conectadas. Se eliminan los duplicados y los modelos sin vista previa, las coincidencias débiles van al final y el resto mantiene el orden de la búsqueda. Los modelos pertenecen a sus autores: consulta las condiciones en la página de cada modelo.

Criterios de selección: el equipo editorial de Polyzon · Texto actualizado el 15/10/2026

Ver la colección Mostrar todos: 1426 modelos →
Colección

Por dónde empezar

Todos los modelos de esta colección

Mostrar todos: 1426 modelos
Sobre la categoría

«Amplifier 3D Models: Docks, Cases and Stands»

The models fall into a few groups that behave differently. Passive acoustic docks and horns shape sound through their internal channel and need no electronics, while board enclosures are built around a specific circuit, its connectors and its controls. Stands and organizers are mostly mechanical: they hold a phone, a small amp or a set of picks and cables in place. Speaker and boombox housings sit in between, since they combine a shell with space for a driver and wiring.

Before printing, compare the author's dimensions with your own parts. Check the internal size against the board or driver, the position of cutouts for sockets and knobs, and how the lid or panels join. Look at the wall thickness, whether the model needs supports, and which material and layer height the author lists; photos of real prints show how the surfaces and fits turned out. Large flat panels can warp, so a slower first layer and a stable material help.

If the first results are too narrow, try synonyms and related terms: amp, amplificador, parlante, speaker, dock, enclosure, case, boombox, headphone amp, phone stand. Searching by the chip or board name, by the driver size, or by the phone model often narrows things faster than a general word. You can also browse neighbouring topics such as audio accessories, desk organizers or small electronics housings.

FAQ

Preguntas frecuentes

Do passive phone amplifiers need power?
No. They rely on the shape of an internal horn or channel to direct sound from the phone speaker outward. Their effect depends on how well the phone fits the slot, so check the opening dimensions first.
What should I measure before printing an amplifier enclosure?
Measure the board outline, the height of the tallest components, and the positions of sockets, knobs and mounting holes. Compare those numbers with the model's stated internal dimensions, since a few millimetres decide whether the board fits.
Which material works for a speaker or amplifier housing?
PLA is easy to print but softens with heat; PETG and ABS tolerate warmer conditions and give different resonance. The author's page usually names a material and settings, so treat that as the reference point and adjust for your printer.
Can I scale a model to fit my phone or board?
Scaling changes wall thickness, screw holes and clearances at the same time, so a scaled enclosure may no longer close or hold its parts. It is usually safer to find a model whose stated dimensions already match, or to edit the source file.
Relacionado
Electrónica

3D-модели корпусов для усилителей и аудио-плат

119079 modelos
Hogar

3D-модели усилителей для ключей и не только

2676 modelos
Herramientas y equipos

3D-модели усилителей и ключей для кранов

65621 modelos
Herramientas y equipos

3D-модели ключей-усилителей для шаровых кранов

111192 modelos
Objetos

Усилитель для шарового крана: 3D-модели и STL файлы

2496 modelos
Música

3D-модели на музыкальную тему для печати

41086 modelos

Todas las categorías de modelos 3D

El catálogo completo de temáticas, del hogar al CNC, con búsqueda en todas las plataformas conectadas.

Abrir el catálogo de categorías