Hogar

3D models of vases: STL files for 3D printing

This collection gathers vase models shared across several platforms, from twisted spiral forms to faceted geometric shapes and figurative designs. Each listing is an STL or similar file you can prepare for a 3D printer. It helps when you need a vessel that matches a particular shelf, bouquet or spool of filament. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Esta colección está escrita en inglés, pero la búsqueda funciona en cualquier idioma.

Una colección de Polyzon · 48 modelos de 6 plataformas

Cómo se elabora esta colección

Polyzon reúne esta colección a partir de los resultados de búsqueda de las plataformas conectadas. Se eliminan los duplicados y los modelos sin vista previa, las coincidencias débiles van al final y el resto mantiene el orden de la búsqueda. Los modelos pertenecen a sus autores: consulta las condiciones en la página de cada modelo.

Criterios de selección: el equipo editorial de Polyzon · Texto actualizado el 11/10/2026

Ver la colección Mostrar todos: 90998 modelos →
Colección

Por dónde empezar

Todos los modelos de esta colección

Mostrar todos: 90998 modelos
Sobre la categoría

«3D models of vases: STL files for 3D printing»

Spiral and twisted vases usually rise as one continuous rotating wall, while faceted and polygonal versions are built from flat planes meeting at angles. Figurative vases take a face, skull or character silhouette and hollow it out into a container. Some designs add a lid, a narrow neck or a patterned outer surface that changes how the piece reads once printed.

Before printing, look at the dimensions and scale the author lists, since a vase that looks small on screen can exceed the build volume once enlarged. Check the wall thickness and whether the model is described for spiral vase mode or for a set number of perimeters, and note any mention of supports or a brim. The material and settings on the model page also matter: a thicker base or a coated interior changes how the piece behaves with water and stems.

If the results feel narrow, try related terms such as planter, bud vase, pen holder, pot or container, because many models are named for their use rather than their shape. Searching by style — spiral, twisted, Voronoi, faceted, low poly — or by theme, such as skulls, leaves or architecture, brings up different sets. Pairing a shape word with a use word usually narrows the list fastest.

FAQ

Preguntas frecuentes

How is a vase model different from a planter model?
Planters often include a drainage opening or a separate saucer, while vases are usually closed at the bottom. Many files sit between the two, so read the description to see which one you are getting.
Can a 3D printed vase hold water?
It depends on the wall thickness, the material and whether the inside is coated. Authors sometimes note this on the model page, and photos of real prints show how a finished piece looks.
Why do some vase models need supports?
Wide overhangs, sharp shoulders or detached decorative elements can require them. Models built for spiral vase mode usually avoid overhangs by design, so check the notes before slicing.
How do I scale a vase to fit a bouquet?
Measure the opening and height you need, then scale in the slicer and check that the wall thickness stays printable. Very large scaling can also push the model past your build volume.
Relacionado
Cocina

3D models of bowls for sweets and snacks

62584 modelos
Hogar

Держатели для зубных щеток: 3D-модели для печати

12573 modelos
Hogar

Speaker Podium and Stand 3D Models to Print

98002 modelos
Hogar

3D models for door stoppers, latches and seals

2545 modelos
Hogar

Modular Organizer 3D Models: STL Trays and Drawers

234297 modelos
Hogar

3D Models for Book and Desk Organizers

253529 modelos

Todas las categorías de modelos 3D

El catálogo completo de temáticas, del hogar al CNC, con búsqueda en todas las plataformas conectadas.

Abrir el catálogo de categorías