Ev ve yaşam

3D models of vases: STL files for 3D printing

This collection gathers vase models shared across several platforms, from twisted spiral forms to faceted geometric shapes and figurative designs. Each listing is an STL or similar file you can prepare for a 3D printer. It helps when you need a vessel that matches a particular shelf, bouquet or spool of filament. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 6 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 11.10.2026

Koleksiyonu gör Tümünü göster: 90998 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 90998 model
Kategori hakkında

«3D models of vases: STL files for 3D printing»

Spiral and twisted vases usually rise as one continuous rotating wall, while faceted and polygonal versions are built from flat planes meeting at angles. Figurative vases take a face, skull or character silhouette and hollow it out into a container. Some designs add a lid, a narrow neck or a patterned outer surface that changes how the piece reads once printed.

Before printing, look at the dimensions and scale the author lists, since a vase that looks small on screen can exceed the build volume once enlarged. Check the wall thickness and whether the model is described for spiral vase mode or for a set number of perimeters, and note any mention of supports or a brim. The material and settings on the model page also matter: a thicker base or a coated interior changes how the piece behaves with water and stems.

If the results feel narrow, try related terms such as planter, bud vase, pen holder, pot or container, because many models are named for their use rather than their shape. Searching by style — spiral, twisted, Voronoi, faceted, low poly — or by theme, such as skulls, leaves or architecture, brings up different sets. Pairing a shape word with a use word usually narrows the list fastest.

FAQ

Sıkça sorulan sorular

How is a vase model different from a planter model?
Planters often include a drainage opening or a separate saucer, while vases are usually closed at the bottom. Many files sit between the two, so read the description to see which one you are getting.
Can a 3D printed vase hold water?
It depends on the wall thickness, the material and whether the inside is coated. Authors sometimes note this on the model page, and photos of real prints show how a finished piece looks.
Why do some vase models need supports?
Wide overhangs, sharp shoulders or detached decorative elements can require them. Models built for spiral vase mode usually avoid overhangs by design, so check the notes before slicing.
How do I scale a vase to fit a bouquet?
Measure the opening and height you need, then scale in the slicer and check that the wall thickness stays printable. Very large scaling can also push the model past your build volume.
İlgili
Mutfak

3D models of bowls for sweets and snacks

62584 model
Ev ve yaşam

Держатели для зубных щеток: 3D-модели для печати

12573 model
Ev ve yaşam

Speaker Podium and Stand 3D Models to Print

98002 model
Ev ve yaşam

3D models for door stoppers, latches and seals

2545 model
Ev ve yaşam

Modular Organizer 3D Models: STL Trays and Drawers

234297 model
Ev ve yaşam

3D Models for Book and Desk Organizers

253529 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç