Electrónica

3D Models for Antenna Rotators and Trackers

This collection gathers 3D models for antenna rotators and trackers: azimuth–elevation assemblies, servo-driven pan-tilt units, mounts, adapters and gear mechanisms. Most of them are printed parts that combine with bearings, servos or stepper motors bought separately, so the STL files are only one part of the build. It helps if you already know which antenna you want to point and how much space the 3D printer has for the largest part. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Esta colección está escrita en inglés, pero la búsqueda funciona en cualquier idioma.

Una colección de Polyzon · 48 modelos de 4 plataformas

Cómo se elabora esta colección

Polyzon reúne esta colección a partir de los resultados de búsqueda de las plataformas conectadas. Se eliminan los duplicados y los modelos sin vista previa, las coincidencias débiles van al final y el resto mantiene el orden de la búsqueda. Los modelos pertenecen a sus autores: consulta las condiciones en la página de cada modelo.

Criterios de selección: el equipo editorial de Polyzon · Texto actualizado el 13/10/2026

Ver la colección Mostrar todos: 12524 modelos →
Colección

Por dónde empezar

Todos los modelos de esta colección

Mostrar todos: 12524 modelos
Sobre la categoría

«3D Models for Antenna Rotators and Trackers»

The designs differ mainly in how they move and how they are put together. Azimuth–elevation rotators turn the antenna around a vertical axis and tilt it up and down, while pan-tilt servo trackers use two hobby servos for the same two directions on a smaller scale. Some entries are complete ground-station builds with a base, mast clamp and control electronics, others are single components such as a worm gear housing, a gear rack, a spinner for a small whip, or an adapter that joins a rotator to a specific antenna feed.

When you open a model page, look first at the size and scale of the largest printed part and compare it with your build volume. Then check the parts list: how many printed pieces there are, whether bearings, shafts, screws or servo models are named, and how the pieces are fastened together. The author's notes usually state the material, layer height, infill and whether supports are needed, and photos of assembled prints show how the joints and cable routing actually look. For outdoor use, the choice between PLA, PETG and ASA matters more than the print itself, and any part that carries load deserves a thicker wall.

If the results feel narrow, try other names for the same idea: rotator, rotor, tracker, pan-tilt, azimuth-elevation or az-el, sat tracker, ground station. Searching for the antenna type instead — helical, Yagi, UHF, VHF, dish feed — often brings up matching mounts and adapters. Related topics such as tripod heads, mast clamps, slip rings, cable glands, stepper brackets and weatherproof enclosures are worth a separate search, because these parts are frequently published on their own rather than as part of a full rotator.

FAQ

Preguntas frecuentes

What is an azimuth–elevation rotator used for?
It points a directional antenna at a target in two axes: azimuth turns it around the mast, elevation tilts it toward the horizon or the sky. This is common for satellite tracking and for long-distance links where the antenna must be aimed precisely.
Which parts of a rotator are usually 3D printed?
Typically the housing, gear stages, brackets, mast clamps and antenna adapters. Bearings, shafts, fasteners and the motor or servo are normally bought parts, and the model page lists what the author used.
What should I check before printing a rotator?
Compare the largest part with your build volume, read the parts list and assembly notes, and look at the material and settings the author gives. Photos of finished prints help you judge how the moving joints fit together.
How do I find more models like these?
Search by synonyms such as rotor, tracker, pan-tilt or az-el, or by the antenna you plan to mount. Related searches for mast clamps, slip rings and stepper brackets often turn up parts that complete the same build.
Relacionado
Electrónica

3D Models for Antenna Mounts and Parts

27203 modelos
Electrónica

3D Models for Antenna Mounts and Brackets

188485 modelos
Electrónica

3D Models of Antenna Brackets and Mounts

187698 modelos
Electrónica

Moxon Antenna 3D Models and STL Files

7452 modelos
Electrónica

Antenna Insulator STL Models for 3D Printing

7959 modelos
Electrónica

3D Models for Antenna to Pipe Mounting

223109 modelos

Todas las categorías de modelos 3D

El catálogo completo de temáticas, del hogar al CNC, con búsqueda en todas las plataformas conectadas.

Abrir el catálogo de categorías