Gadgets

5 Inch Drone 3D Models and STL Files for FPV

This collection gathers 3D models built around 5 inch drone platforms: frames, propeller guards, camera mounts and small hardware. It is useful when you already fly a quadcopter and want to replace a broken part or try a different layout. Most files are meant for FDM 3D printing, though some small parts are also sliced for resin. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Le texte de cette collection est rédigé en anglais ; la recherche, elle, fonctionne dans toutes les langues.

Une collection Polyzon · 48 modèles sur 6 plateformes

Comment cette collection est composée

Polyzon compose cette collection à partir des résultats de recherche des plateformes connectées. Les doublons et les modèles sans aperçu sont retirés, les correspondances faibles sont placées à la fin, et le reste suit l’ordre de la recherche. Les modèles appartiennent à leurs auteurs : consultez les conditions sur la page de chaque modèle.

Règles de sélection : la rédaction de Polyzon · Texte mis à jour le 11/10/2026

Voir la collection Tout afficher : 172944 modèles →
Collection

Par où commencer

Tous les modèles de cette collection

Tout afficher : 172944 modèles
À propos de la catégorie

«5 Inch Drone 3D Models and STL Files for FPV»

Frame models are the largest group here, and they differ mainly in geometry: standard X layouts, stretched versions, and deadcat designs that move the props out of the camera view. Some are complete frames with arms and plates, while others are single replacement pieces such as an arm, a top plate or a camera cage. Propeller guards and stands form a second group, ranging from full rings to half guards and simple desk stands for storage.

Before printing, look at the author's page for the size and motor spacing, the number of separate parts, and whether supports are needed. Check which material and layer settings the author lists, since thin arms and mounts behave differently in PLA, PETG or a fibre-filled filament. Photos of real prints are the quickest way to judge wall thickness and how the part fits around motors, cameras and battery straps.

If you do not find what you need, widen the search terms: quadcopter, FPV, cinewhoop, bando or racing frame, and try the size variants such as 3.5 or 2.5 inch, since many parts scale across classes. Related searches like camera mount, motor skid, antenna holder, battery pad or wall mount often surface parts that are not labelled with the frame size. You can also search by the component you want to replace rather than by the drone itself.

FAQ

Questions fréquentes

What parts of a 5 inch drone can be 3D printed?
Frames, arms, camera mounts, propeller guards, stands, motor skids and small holders appear most often. Structural parts such as arms and frames carry flight loads, so the material and print orientation matter more than for a stand or a storage piece.
Which filament is used for printed drone parts?
Authors usually list what they printed with, and common choices are PETG, PLA+ and fibre-filled nylons. Stiff filaments suit frames and mounts, while more flexible ones are used where a part needs to absorb impacts.
How do I know if a frame model matches my motors and props?
Check the motor mounting pattern, the arm length and the stated prop size on the model page. Compare those values with your own motors and propellers before slicing, and read any notes the author added about tolerances.
Do printed drone parts need supports?
It depends on the geometry: flat plates and stands often print without them, while camera cages and angled arms may need them. The author's page usually shows the orientation used, which is the safest guide for your own setup.
Voir aussi
Objets

5-Inch Drone Propellers: 3D Models and STL Files

138849 modèles
Électronique

5-Inch Racing Drone 3D Models and STL Parts

153609 modèles
Électronique

3D Models for Drone Frames and Propellers

43929 modèles
Électronique

FPV Seven-Inch Drone 3D Models and STL Files

84454 modèles
Maison et quotidien

2-Inch Box 3D Models and STL Files to Browse

11898 modèles
Électronique

2 Inch Speaker 3D Models: Boxes, Enclosures, Stands

12817 modèles

Toutes les catégories de modèles 3D

Le catalogue complet des thèmes, de la maison à la CNC, avec une recherche sur tous les sites connectés.

Ouvrir le catalogue des catégories