数码配件

5 Inch Drone 3D Models and STL Files for FPV

This collection gathers 3D models built around 5 inch drone platforms: frames, propeller guards, camera mounts and small hardware. It is useful when you already fly a quadcopter and want to replace a broken part or try a different layout. Most files are meant for FDM 3D printing, though some small parts are also sliced for resin. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

本合集的文字为英文，搜索本身支持任何语言。

Polyzon合集 · 48个模型 来自6个平台

合集是如何整理的

此合集由Polyzon根据已接入平台的搜索结果整理而成：去除重复项和没有预览图的模型，匹配度低的排在最后，其余按搜索结果顺序排列。模型归作者所有——请在各模型页面查看使用条款。

筛选规则：Polyzon编辑部 · 文字更新于2026年10月11日

查看合集 查看全部172944个模型 →
合集

从这里开始

合集中的全部模型

查看全部172944个模型
关于此分类

«5 Inch Drone 3D Models and STL Files for FPV»

Frame models are the largest group here, and they differ mainly in geometry: standard X layouts, stretched versions, and deadcat designs that move the props out of the camera view. Some are complete frames with arms and plates, while others are single replacement pieces such as an arm, a top plate or a camera cage. Propeller guards and stands form a second group, ranging from full rings to half guards and simple desk stands for storage.

Before printing, look at the author's page for the size and motor spacing, the number of separate parts, and whether supports are needed. Check which material and layer settings the author lists, since thin arms and mounts behave differently in PLA, PETG or a fibre-filled filament. Photos of real prints are the quickest way to judge wall thickness and how the part fits around motors, cameras and battery straps.

If you do not find what you need, widen the search terms: quadcopter, FPV, cinewhoop, bando or racing frame, and try the size variants such as 3.5 or 2.5 inch, since many parts scale across classes. Related searches like camera mount, motor skid, antenna holder, battery pad or wall mount often surface parts that are not labelled with the frame size. You can also search by the component you want to replace rather than by the drone itself.

FAQ

常见问题

What parts of a 5 inch drone can be 3D printed?
Frames, arms, camera mounts, propeller guards, stands, motor skids and small holders appear most often. Structural parts such as arms and frames carry flight loads, so the material and print orientation matter more than for a stand or a storage piece.
Which filament is used for printed drone parts?
Authors usually list what they printed with, and common choices are PETG, PLA+ and fibre-filled nylons. Stiff filaments suit frames and mounts, while more flexible ones are used where a part needs to absorb impacts.
How do I know if a frame model matches my motors and props?
Check the motor mounting pattern, the arm length and the stated prop size on the model page. Compare those values with your own motors and propellers before slicing, and read any notes the author added about tolerances.
Do printed drone parts need supports?
It depends on the geometry: flat plates and stands often print without them, while camera cages and angled arms may need them. The author's page usually shows the orientation used, which is the safest guide for your own setup.
相关
物品

5-Inch Drone Propellers: 3D Models and STL Files

138849个模型
电子产品

5-Inch Racing Drone 3D Models and STL Parts

153609个模型
电子产品

3D Models for Drone Frames and Propellers

43929个模型
电子产品

FPV Seven-Inch Drone 3D Models and STL Files

84454个模型
家居日用

2-Inch Box 3D Models and STL Files to Browse

11898个模型
电子产品

2 Inch Speaker 3D Models: Boxes, Enclosures, Stands

12817个模型

全部3D模型分类

完整的主题目录：从家居日用到CNC，均可在已接入的来源平台中搜索。

查看分类目录