Électronique

Arduino Leonardo and Uno Case 3D Models to Print

This collection gathers 3D printing files for cases that hold Arduino Leonardo and Uno boards. Enclosures range from slim snap-fit shells to taller boxes with room for shields, displays and wiring. You can compare how each design handles ports, buttons and board access before committing to a print. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Le texte de cette collection est rédigé en anglais ; la recherche, elle, fonctionne dans toutes les langues.

Une collection Polyzon · 48 modèles sur 6 plateformes

Comment cette collection est composée

Polyzon compose cette collection à partir des résultats de recherche des plateformes connectées. Les doublons et les modèles sans aperçu sont retirés, les correspondances faibles sont placées à la fin, et le reste suit l’ordre de la recherche. Les modèles appartiennent à leurs auteurs : consultez les conditions sur la page de chaque modèle.

Règles de sélection : la rédaction de Polyzon · Texte mis à jour le 15/10/2026

Voir la collection Tout afficher : 123764 modèles →
Collection

Par où commencer

Tous les modèles de cette collection

Tout afficher : 123764 modèles
À propos de la catégorie

«Arduino Leonardo and Uno Case 3D Models to Print»

The designs fall into a few groups. Some are minimal shells that wrap the board closely and leave the USB and power sockets open. Others are larger boxes built around a stacked layout, where a shield sits above the board and the case grows in height. A further group adds cutouts for displays, panel connectors or a breadboard area beside the board.

When you choose a model, check the board revision and dimensions the author lists, because header positions and port placement move between versions. Look at the number of parts, how they join, and whether the design calls for supports or screws. The material and layer height the author used also matter for thin walls and snap features, and photos of real prints show how the openings line up.

If the results feel too narrow, try other words for the same object: enclosure, housing, shell, box or mount. Searching for the shield or display you plan to stack, or for a panel or stand rather than a full case, often surfaces more options. Parametric and generator-based designs are another route when no fixed model matches your board layout.

FAQ

Questions fréquentes

Will a case made for one Arduino board fit another?
Not always. Board outlines are similar in some families, but port, button and header positions shift between revisions, so compare the dimensions the author gives with your own board.
Do these cases need supports?
It depends on the design. Flat-bottomed shells usually print without them, while overhangs around port openings or clips may need support. The author's notes and photos are the quickest way to tell.
What should I check before printing an enclosure?
Wall thickness, clearance around the USB socket, and how the lid or the board is retained. Also confirm the screw sizes and the material the author lists.
How do I find a case for a board with a shield attached?
Search for the shield name together with the board, or for terms like stacked or extended enclosure. Check the internal height in the description, since a shield adds to the overall stack.
Voir aussi
Électronique

Arduino 3D Models: Boards, Cases and Robot Parts

32225 modèles
Électronique

Arduino Uno R3 Case 3D Models and STL Files

4062 modèles
Électronique

Arduino Uno 3D Models: Cases, Mounts, Shields

20037 modèles
Électronique

Arduino Mega 3D Models: Cases, Mounts and STL Files

3626 modèles
Électronique

Arduino TFT Display 3D Models and STL Parts

17515 modèles
Électronique

Arduino Uno Cases and Mounts: 3D Models to Print

19513 modèles

Toutes les catégories de modèles 3D

Le catalogue complet des thèmes, de la maison à la CNC, avec une recherche sur tous les sites connectés.

Ouvrir le catalogue des catégories