Outils et équipement

3D Models for Groove and Channel Holders

This collection gathers STL holders made to sit inside grooves, wall chases and channels. You will find cable retainers, tool clips, print-in-place parts and decorative pieces built around a groove pattern. It helps when a cable run or a tool rail needs a mount that follows the recess instead of sitting on the surface. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Le texte de cette collection est rédigé en anglais ; la recherche, elle, fonctionne dans toutes les langues.

Une collection Polyzon · 48 modèles sur 4 plateformes

Comment cette collection est composée

Polyzon compose cette collection à partir des résultats de recherche des plateformes connectées. Les doublons et les modèles sans aperçu sont retirés, les correspondances faibles sont placées à la fin, et le reste suit l’ordre de la recherche. Les modèles appartiennent à leurs auteurs : consultez les conditions sur la page de chaque modèle.

Règles de sélection : la rédaction de Polyzon · Texte mis à jour le 11/10/2026

Voir la collection Tout afficher : 12119 modèles →
Collection

Par où commencer

Tous les modèles de cette collection

Tout afficher : 12119 modèles
À propos de la catégorie

«3D Models for Groove and Channel Holders»

The models differ mainly in what they hold and how they attach. Cable retainers and channel clips grip a run of wire inside a narrow recess, while tool holders use a wider body or a hook. Print-in-place designs combine the mount and the moving part in a single piece, and decorative holders treat the groove as a visual pattern rather than a fixing point.

Before printing, measure the width and depth of the groove and the thickness of the wall around it. Check how many parts the model has, whether the author lists supports, and which material and settings are given. Photos of real prints show how much clearance the designer left, which matters for parts that must slide or clip in.

Search terms can be widened to channel, chase, slot, rail or extrusion profile, since the same idea appears under different names. Cable management, DIN rail and desk organisation bring up related clips and mounts. If a holder is close but not exact, a small scale change in the slicer is often the next step, as long as the wall thickness still holds.

FAQ

Questions fréquentes

How do I measure a groove before choosing a holder?
Take the inner width and depth at the narrowest point, and note the wall thickness around the opening. A holder that matches the recess in two dimensions still needs a little clearance to slide in.
Do groove holders need supports?
It depends on the shape: flat-backed clips usually print without them, while hooks and overhangs may need them. The author's page often states the orientation and whether supports were used.
Which material works for clips that flex?
Filaments that tolerate bending, such as PETG or nylon blends, are common for snap-fit clips, while rigid parts can use PLA. The author's listed material and settings are the first thing to compare.
Can a holder be scaled to fit a different channel?
Scaling changes wall thickness and clearance along with the size, so a small adjustment is safer than a large one. Check the model page for the dimensions the author designed around.
Voir aussi
Objets

3D Models of Holders: STL Files for Desk and Home

1468953 modèles
Outils et équipement

Hose Holder STL Files for 3D Printing

497789 modèles
Outils et équipement

Tool Holder STL Models for Printers and Workshops

724065 modèles
Outils et équipement

Articulated Holder 3D Models: STL Files to Print

5519 modèles
Outils et équipement

3D Models for Disc Holders: STL Files to Print

502918 modèles
Outils et équipement

Filament Holder 3D Models: STL Files for Spools

610914 modèles

Toutes les catégories de modèles 3D

Le catalogue complet des thèmes, de la maison à la CNC, avec une recherche sur tous les sites connectés.

Ouvrir le catalogue des catégories