Alet ve ekipman

3D Models for Groove and Channel Holders

This collection gathers STL holders made to sit inside grooves, wall chases and channels. You will find cable retainers, tool clips, print-in-place parts and decorative pieces built around a groove pattern. It helps when a cable run or a tool rail needs a mount that follows the recess instead of sitting on the surface. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 4 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 11.10.2026

Koleksiyonu gör Tümünü göster: 12119 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 12119 model
Kategori hakkında

«3D Models for Groove and Channel Holders»

The models differ mainly in what they hold and how they attach. Cable retainers and channel clips grip a run of wire inside a narrow recess, while tool holders use a wider body or a hook. Print-in-place designs combine the mount and the moving part in a single piece, and decorative holders treat the groove as a visual pattern rather than a fixing point.

Before printing, measure the width and depth of the groove and the thickness of the wall around it. Check how many parts the model has, whether the author lists supports, and which material and settings are given. Photos of real prints show how much clearance the designer left, which matters for parts that must slide or clip in.

Search terms can be widened to channel, chase, slot, rail or extrusion profile, since the same idea appears under different names. Cable management, DIN rail and desk organisation bring up related clips and mounts. If a holder is close but not exact, a small scale change in the slicer is often the next step, as long as the wall thickness still holds.

FAQ

Sıkça sorulan sorular

How do I measure a groove before choosing a holder?
Take the inner width and depth at the narrowest point, and note the wall thickness around the opening. A holder that matches the recess in two dimensions still needs a little clearance to slide in.
Do groove holders need supports?
It depends on the shape: flat-backed clips usually print without them, while hooks and overhangs may need them. The author's page often states the orientation and whether supports were used.
Which material works for clips that flex?
Filaments that tolerate bending, such as PETG or nylon blends, are common for snap-fit clips, while rigid parts can use PLA. The author's listed material and settings are the first thing to compare.
Can a holder be scaled to fit a different channel?
Scaling changes wall thickness and clearance along with the size, so a small adjustment is safer than a large one. Check the model page for the dimensions the author designed around.
İlgili
Nesneler

3D Models of Holders: STL Files for Desk and Home

1440828 model
Alet ve ekipman

Hose Holder STL Files for 3D Printing

497789 model
Alet ve ekipman

Tool Holder STL Models for Printers and Workshops

724065 model
Alet ve ekipman

Articulated Holder 3D Models: STL Files to Print

5519 model
Alet ve ekipman

3D Models for Disc Holders: STL Files to Print

502918 model
Alet ve ekipman

Filament Holder 3D Models: STL Files for Spools

610914 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç