Gadgets

DJI O4 Canopy STL Models for Whoops and Cinewhoops

This collection gathers 3D-printable canopies and mounts built around DJI O4 air units, from tiny whoop shells to larger cinewhoop pods. You will also find camera protectors, adapters and TPU parts with inserts for filters or antennas. It is useful when you plan a 3D printing project for a small FPV frame and need a shell that matches the camera version you own. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Le texte de cette collection est rédigé en anglais ; la recherche, elle, fonctionne dans toutes les langues.

Une collection Polyzon · 47 modèles sur 4 plateformes

Comment cette collection est composée

Polyzon compose cette collection à partir des résultats de recherche des plateformes connectées. Les doublons et les modèles sans aperçu sont retirés, les correspondances faibles sont placées à la fin, et le reste suit l’ordre de la recherche. Les modèles appartiennent à leurs auteurs : consultez les conditions sur la page de chaque modèle.

Règles de sélection : la rédaction de Polyzon · Texte mis à jour le 13/10/2026

Voir la collection Tout afficher : 3380 modèles →
Collection

Par où commencer

Tous les modèles de cette collection

Tout afficher : 3380 modèles
À propos de la catégorie

«DJI O4 Canopy STL Models for Whoops and Cinewhoops»

Most entries fall into a few groups. Tiny whoop canopies cover 65 and 75 mm frames and usually wrap the camera and board in a single shell. Cinewhoop canopies for 2-inch and larger frames are bigger, often with separate camera brackets or inserts. A third group is camera-only protection and adapters that let an O4 unit sit on a frame designed for another camera.

Before printing, compare the canopy with your hardware. Check which O4 version the file was drawn for, since Lite, standard and Pro units differ in size and lens position, and note any lens mod the author mentions. Look at the mounting hole spacing, screw size, wall thickness and whether the shell needs supports. The material and slicer settings listed on the model page, along with photos of finished prints, tell you more than the render.

If the results are thin, change the wording. Try "air unit", "o4 lite", "o4 pro", "camera mount" or "whoop shell" instead of canopy, and add the frame size such as 65, 75 or 2 inch. Related searches include antenna mounts, ND filter holders and camera brackets, and remixes of a canopy often appear under the original file's name.

FAQ

Questions fréquentes

What is a DJI O4 canopy used for?
It holds the air unit and camera on a small frame, protecting the board and lens and shaping how the unit sits in the airflow. Some versions also carry antennas or filters.
How do I know which O4 version a canopy is drawn for?
The model page usually states Lite, standard or Pro, and sometimes a lens mod. Compare those notes with the dimensions of your own unit before printing.
Which filament do people use for these canopies?
TPU is common for whoop canopies because it flexes on impact, while rigid filaments appear in brackets and adapters. The author's listed material and settings are the starting point.
How can I check that a canopy matches my frame?
Compare the mounting hole spacing and screw size with your frame, and look at the photos of printed parts. If the file is a remix, the description often names the frame it was adjusted for.
Voir aussi
Gadgets

DJI O4 3D Models: Mounts, Cases and FPV Parts

176934 modèles
Gadgets

FPV Mark 4 DJI O4 Pro Mounts: 3D Printing Files

2730 modèles
Gadgets

DJI Drone 3D Models and STL Parts to Print

24585 modèles
Gadgets

DJI Mini 3 Accessories: 3D Models and STL Files

1260928 modèles
Gadgets

Controller 3D Models for DJI RC Setups

3048 modèles
Gadgets

DJI Mavic 3D Models: Cases, Frames and Mounts

12623 modèles

Toutes les catégories de modèles 3D

Le catalogue complet des thèmes, de la maison à la CNC, avec une recherche sur tous les sites connectés.

Ouvrir le catalogue des catégories