Gadgets

DJI O4 Canopy STL Models for Whoops and Cinewhoops

This collection gathers 3D-printable canopies and mounts built around DJI O4 air units, from tiny whoop shells to larger cinewhoop pods. You will also find camera protectors, adapters and TPU parts with inserts for filters or antennas. It is useful when you plan a 3D printing project for a small FPV frame and need a shell that matches the camera version you own. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

O texto desta coleção está em inglês; a busca funciona em qualquer idioma.

Uma coleção do Polyzon · 47 modelos de 4 sites

Como esta coleção é montada

O Polyzon monta esta coleção a partir dos resultados de busca dos sites conectados. Repetições e modelos sem prévia são removidos, correspondências fracas vão para o final e o restante segue a ordem da busca. Os modelos pertencem aos seus autores — confira os termos na página de cada modelo.

Regras de seleção: equipe editorial do Polyzon · Texto atualizado em 13/10/2026

Ver a coleção Mostrar todos: 3380 modelos →
Coleção

Comece por aqui

Todos os modelos desta coleção

Mostrar todos: 3380 modelos
Sobre a categoria

«DJI O4 Canopy STL Models for Whoops and Cinewhoops»

Most entries fall into a few groups. Tiny whoop canopies cover 65 and 75 mm frames and usually wrap the camera and board in a single shell. Cinewhoop canopies for 2-inch and larger frames are bigger, often with separate camera brackets or inserts. A third group is camera-only protection and adapters that let an O4 unit sit on a frame designed for another camera.

Before printing, compare the canopy with your hardware. Check which O4 version the file was drawn for, since Lite, standard and Pro units differ in size and lens position, and note any lens mod the author mentions. Look at the mounting hole spacing, screw size, wall thickness and whether the shell needs supports. The material and slicer settings listed on the model page, along with photos of finished prints, tell you more than the render.

If the results are thin, change the wording. Try "air unit", "o4 lite", "o4 pro", "camera mount" or "whoop shell" instead of canopy, and add the frame size such as 65, 75 or 2 inch. Related searches include antenna mounts, ND filter holders and camera brackets, and remixes of a canopy often appear under the original file's name.

FAQ

Perguntas frequentes

What is a DJI O4 canopy used for?
It holds the air unit and camera on a small frame, protecting the board and lens and shaping how the unit sits in the airflow. Some versions also carry antennas or filters.
How do I know which O4 version a canopy is drawn for?
The model page usually states Lite, standard or Pro, and sometimes a lens mod. Compare those notes with the dimensions of your own unit before printing.
Which filament do people use for these canopies?
TPU is common for whoop canopies because it flexes on impact, while rigid filaments appear in brackets and adapters. The author's listed material and settings are the starting point.
How can I check that a canopy matches my frame?
Compare the mounting hole spacing and screw size with your frame, and look at the photos of printed parts. If the file is a remix, the description often names the frame it was adjusted for.
Relacionados
Gadgets

DJI O4 3D Models: Mounts, Cases and FPV Parts

176934 modelos
Gadgets

FPV Mark 4 DJI O4 Pro Mounts: 3D Printing Files

2730 modelos
Gadgets

DJI Drone 3D Models and STL Parts to Print

24585 modelos
Gadgets

DJI Mini 3 Accessories: 3D Models and STL Files

1260928 modelos
Gadgets

Controller 3D Models for DJI RC Setups

3048 modelos
Gadgets

DJI Mavic 3D Models: Cases, Frames and Mounts

12623 modelos

Todas as categorias de modelos 3D

O catálogo completo de temas — de casa e utilidades a CNC, com busca em todos os sites conectados.

Abrir o catálogo de categorias