Musique

3D Printed Speaker Grills and Woofer Guards: STL Files

This collection gathers STL files for speaker grills, from honeycomb woofer guards to adapters that fit car doors and boat panels. The models differ in diameter, mesh pattern and how they attach, so the same search covers studio monitors, small full-range drivers and 6.5-inch woofers. It helps when a factory grill is missing or when you want a different look for a 3D printing project. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Le texte de cette collection est rédigé en anglais ; la recherche, elle, fonctionne dans toutes les langues.

Une collection Polyzon · 46 modèles sur 4 plateformes

Comment cette collection est composée

Polyzon compose cette collection à partir des résultats de recherche des plateformes connectées. Les doublons et les modèles sans aperçu sont retirés, les correspondances faibles sont placées à la fin, et le reste suit l’ordre de la recherche. Les modèles appartiennent à leurs auteurs : consultez les conditions sur la page de chaque modèle.

Règles de sélection : la rédaction de Polyzon · Texte mis à jour le 12/10/2026

Voir la collection Tout afficher : 3765 modèles →
Collection

Par où commencer

Tous les modèles de cette collection

Tout afficher : 3765 modèles
À propos de la catégorie

«3D Printed Speaker Grills and Woofer Guards: STL Files»

The files fall into a few groups. Honeycomb and hex guards sit over a cone and leave the mesh open, while patterned covers use spiderweb or radial ribs for a different look. Some models are drawn for one driver size, such as a 6.5-inch or 165 mm woofer, and others are generic rings you match to your own measurements. There are also replacements shaped for a particular speaker or device, and adapters that mount a driver into a car door or a boat panel.

Before printing, measure the cone diameter and the distance between mounting holes rather than trusting the nominal size alone. Check whether the grill is a press fit, a screw-on ring or a clip, and look at the wall thickness of the mesh, since thin ribs flex and thick ones block more sound. Overhangs and steep mesh angles decide whether supports are needed, so read the material and settings the author lists and look at photos of real prints.

Search terms are worth varying. Try grill, grille, gitter, guard or cover, and give dimensions in both inches and millimetres, for example 6.5in and 165mm. Adding the driver type narrows results: woofer, coax, full range or tweeter. If nothing matches, widen to related topics such as speaker stands, enclosures, mounting rings and door adapters.

FAQ

Questions fréquentes

How do I pick the right grill size for my speaker?
Measure the cone diameter and the mounting hole spacing on your driver, then compare those numbers with the model's stated dimensions. Convert between inches and millimetres, since a 6.5-inch driver is about 165 mm across.
Do speaker grills need supports when printing?
It depends on the mesh angle and the overhangs in the frame. Flat grills printed face up often need none, while domed or deep honeycomb shapes may need them; the author's notes and print photos usually show which orientation was used.
Which material works for a speaker grill?
The choice depends on where the grill sits and how much heat or sunlight it sees. Check the material and settings the author lists, and keep in mind that a stiff material holds thin ribs better than a very flexible one.
Can I scale a grill to fit another driver?
Scaling changes wall thickness, mesh openings and mounting points at the same time, so a scaled model may no longer fit the screws or clips. It is safer to look for a model drawn for your diameter.
Voir aussi
Musique

8-Inch Speaker Grill STL Models for 3D Printing

53853 modèles
Électronique

Speaker Grill 3D Models and STL Files

17492 modèles
Personnages

Minion Figures, Fan Grilles and Speaker STL Models

1909 modèles
Électronique

3D Models for Speaker Grills and Mounts

2959 modèles
Électronique

Speaker Grill 3D Models for 165 mm Drivers

32515 modèles
Électronique

3D models for 6.5-inch speaker grills and rings

126082 modèles

Toutes les catégories de modèles 3D

Le catalogue complet des thèmes, de la maison à la CNC, avec une recherche sur tous les sites connectés.

Ouvrir le catalogue des catégories