音乐

3D Printed Speaker Grills and Woofer Guards: STL Files

This collection gathers STL files for speaker grills, from honeycomb woofer guards to adapters that fit car doors and boat panels. The models differ in diameter, mesh pattern and how they attach, so the same search covers studio monitors, small full-range drivers and 6.5-inch woofers. It helps when a factory grill is missing or when you want a different look for a 3D printing project. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

本合集的文字为英文，搜索本身支持任何语言。

Polyzon合集 · 46个模型 来自4个平台

合集是如何整理的

此合集由Polyzon根据已接入平台的搜索结果整理而成：去除重复项和没有预览图的模型，匹配度低的排在最后，其余按搜索结果顺序排列。模型归作者所有——请在各模型页面查看使用条款。

筛选规则：Polyzon编辑部 · 文字更新于2026年10月12日

查看合集 查看全部3765个模型 →
合集

从这里开始

合集中的全部模型

查看全部3765个模型
关于此分类

«3D Printed Speaker Grills and Woofer Guards: STL Files»

The files fall into a few groups. Honeycomb and hex guards sit over a cone and leave the mesh open, while patterned covers use spiderweb or radial ribs for a different look. Some models are drawn for one driver size, such as a 6.5-inch or 165 mm woofer, and others are generic rings you match to your own measurements. There are also replacements shaped for a particular speaker or device, and adapters that mount a driver into a car door or a boat panel.

Before printing, measure the cone diameter and the distance between mounting holes rather than trusting the nominal size alone. Check whether the grill is a press fit, a screw-on ring or a clip, and look at the wall thickness of the mesh, since thin ribs flex and thick ones block more sound. Overhangs and steep mesh angles decide whether supports are needed, so read the material and settings the author lists and look at photos of real prints.

Search terms are worth varying. Try grill, grille, gitter, guard or cover, and give dimensions in both inches and millimetres, for example 6.5in and 165mm. Adding the driver type narrows results: woofer, coax, full range or tweeter. If nothing matches, widen to related topics such as speaker stands, enclosures, mounting rings and door adapters.

FAQ

常见问题

How do I pick the right grill size for my speaker?
Measure the cone diameter and the mounting hole spacing on your driver, then compare those numbers with the model's stated dimensions. Convert between inches and millimetres, since a 6.5-inch driver is about 165 mm across.
Do speaker grills need supports when printing?
It depends on the mesh angle and the overhangs in the frame. Flat grills printed face up often need none, while domed or deep honeycomb shapes may need them; the author's notes and print photos usually show which orientation was used.
Which material works for a speaker grill?
The choice depends on where the grill sits and how much heat or sunlight it sees. Check the material and settings the author lists, and keep in mind that a stiff material holds thin ribs better than a very flexible one.
Can I scale a grill to fit another driver?
Scaling changes wall thickness, mesh openings and mounting points at the same time, so a scaled model may no longer fit the screws or clips. It is safer to look for a model drawn for your diameter.
相关
音乐

8-Inch Speaker Grill STL Models for 3D Printing

53853个模型
电子产品

Speaker Grill 3D Models and STL Files

17492个模型
角色

Minion Figures, Fan Grilles and Speaker STL Models

1909个模型
电子产品

3D Models for Speaker Grills and Mounts

2959个模型
电子产品

Speaker Grill 3D Models for 165 mm Drivers

32515个模型
电子产品

3D models for 6.5-inch speaker grills and rings

126082个模型

全部3D模型分类

完整的主题目录：从家居日用到CNC，均可在已接入的来源平台中搜索。

查看分类目录