Bureau

Cable Chain and Cable Management 3D Models

This collection covers 3D models for routing, holding and protecting cables, from small clips to linked chains and electronics mounts. It helps when a standard part does not match your cable diameter or mounting point. Every listing can be opened as an STL and reviewed before it goes to a 3D printer. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Le texte de cette collection est rédigé en anglais ; la recherche, elle, fonctionne dans toutes les langues.

Une collection Polyzon · 48 modèles sur 3 plateformes

Comment cette collection est composée

Polyzon compose cette collection à partir des résultats de recherche des plateformes connectées. Les doublons et les modèles sans aperçu sont retirés, les correspondances faibles sont placées à la fin, et le reste suit l’ordre de la recherche. Les modèles appartiennent à leurs auteurs : consultez les conditions sur la page de chaque modèle.

Règles de sélection : la rédaction de Polyzon · Texte mis à jour le 14/10/2026

Voir la collection Tout afficher : 3036 modèles →
Collection

Par où commencer

Tous les modèles de cette collection

Tout afficher : 3036 modèles
À propos de la catégorie

«Cable Chain and Cable Management 3D Models»

The models here fall into a few groups. Small clips and stops hold a single cable or housing in place on a frame or tube. Winders and spacers keep slack cable tidy or lift a board above a surface. Enclosures and mounts carry connectors, terminals or small boards, while caps and clamps cover cable ends and solder joints. Decorative pieces such as circuit-shaped lamps follow the same theme but serve a different purpose.

When choosing a model, start with the cable itself: measure the outer diameter and count how many cables run through one part. On the author's page, look at the inner channel size, wall thickness and how the part is fixed, whether by screw holes, a zip tie or an adhesive face. Check the material and settings the author lists, since parts that flex or sit near heat behave differently from rigid static ones. Also look at photos of real prints to judge how the links or clips actually meet.

If the first search gives few results, try other names for the same idea: cable chain, drag chain, cable carrier, wire guide, cord organizer, strain relief or grommet. Related searches such as electronics enclosure, PCB standoff, terminal block box or breadboard holder often surface parts that fit the same project. Combining a material or mounting word with the part name usually narrows the list faster than browsing a whole category.

FAQ

Questions fréquentes

What is a cable chain in 3D printing?
It is a series of linked segments that guides and protects cables moving along one axis. Most versions are printed as separate links or as one piece with flexible joints, then assembled.
Which material works for cable clips and chains?
It depends on how much the part bends and where it sits. Rigid static clips are often printed in PLA, while parts that flex repeatedly or sit near heat are commonly made in PETG or similar filaments. The author's page usually names a material and settings.
How do I pick the right size?
Measure the outer diameter of the cable and the number of cables that share one channel. Then compare those numbers with the inner dimensions given on the model page, and allow a little clearance so the cable still moves.
Do these parts need supports?
It varies by design and print orientation. Flat clips and caps often print without them, while chains, overhangs and enclosed channels may need them. The author's page or the model preview usually shows whether supports are needed.
Voir aussi
Bureau

Cable Chain STL Models for 3D Printer Cable Routing

69422 modèles
Maison et quotidien

Cable Holder 3D Models: STL Organizers and Guides

19008 modèles
Pièces d’imprimante

Cable Conduit and Management 3D Models

9240 modèles
Électronique

Cable Fitting 3D Models: Glands, Clips, Guides

46018 modèles
Électronique

Sealed Cable 3D Models and STL Enclosures

3525 modèles
Électronique

Cable Combs, Organizers and Management 3D Models

42519 modèles

Toutes les catégories de modèles 3D

Le catalogue complet des thèmes, de la maison à la CNC, avec une recherche sur tous les sites connectés.

Ouvrir le catalogue des catégories