Personnages

3D Models of Claws: STL Files for Print and Play

This collection gathers claw-themed 3D models: hair clips, animal and dinosaur claws, mechanical grippers, costume props and small novelty pieces. Most of them are made for desktop 3D printing, and many are designed to work straight off the build plate. It helps you compare shapes, scales and mechanisms before choosing an STL to print. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Le texte de cette collection est rédigé en anglais ; la recherche, elle, fonctionne dans toutes les langues.

Une collection Polyzon · 47 modèles sur 8 plateformes

Comment cette collection est composée

Polyzon compose cette collection à partir des résultats de recherche des plateformes connectées. Les doublons et les modèles sans aperçu sont retirés, les correspondances faibles sont placées à la fin, et le reste suit l’ordre de la recherche. Les modèles appartiennent à leurs auteurs : consultez les conditions sur la page de chaque modèle.

Règles de sélection : la rédaction de Polyzon · Texte mis à jour le 11/10/2026

Voir la collection Tout afficher : 35792 modèles →
Collection

Par où commencer

Tous les modèles de cette collection

Tout afficher : 35792 modèles
À propos de la catégorie

«3D Models of Claws: STL Files for Print and Play»

The models fall into a few groups. Hair claw clips are usually flat, springy shapes that grip by geometry rather than by a metal spring, and some are split into modules you can mix. Animal and dinosaur claws are mostly decorative or educational, while mechanical claws and grippers use hinges, pins or living joints to open and close. Costume claws and prop shields sit closer to cosplay and tabletop use, and small fidget or ring versions are scaled down for quick prints.

When choosing a model, open the author's page and read what is listed there: overall size and scale, how many separate parts are included, whether assembly or glue is needed, and whether supports are required. For print-in-place mechanisms, the clearance between moving parts matters more than the shape, so check the nozzle size and layer height the author mentions and compare them with your own setup. Photos of real prints are the most useful signal of how the geometry behaves at the stated scale.

If the first results are too narrow, try related wording. Searches for gripper, pincer, talon, raptor, mantis or crab claw bring up different sets of models than the word claw alone, and terms like hair clip, fidget or cosplay prop move the results toward a specific use. Combining a material or a scale with the topic, such as a resin figure or a large decorative piece, also narrows the list.

FAQ

Questions fréquentes

What is a print-in-place claw?
It is a model whose moving parts are printed already assembled, with small gaps between them instead of separate pins or screws. The joint works only if your printer reproduces those gaps cleanly, so the stated clearance and layer height matter.
Which material works for a claw clip or gripper?
It depends on how much the part flexes. Stiff decorative claws are often printed in rigid filament or resin, while clips and grippers that bend benefit from a filament that tolerates repeated flexing. The author's page usually names a material and settings.
How do I scale a claw model to fit?
Measure the space or the hand it is meant for, then compare that with the dimensions on the model page. Scaling a print-in-place mechanism changes its clearances, so a model that works at one size may need adjustment at another.
Can claw models be used for cosplay and tabletop figures?
Yes, both appear in this topic, but they differ in scale and detail. Figure-scale claws are small and often printed in resin, while wearable props are larger and usually split into parts that are joined after printing.
Voir aussi
Cosplay et props

Finger Claws: 3D Models and STL Files for 3D Printing

22481 modèles
Mode et accessoires

Women's Bags with Claws: 3D Models and STL Files

2367 modèles
Cosplay et props

Killer Drone Claws: 3D Models and STL Files

2859 modèles
Personnages

Koschei 3D Models: STL Figures and Tabletop Parts

37 modèles
Personnages

Kitana and Katana STL Models for 3D Printing

6053 modèles
Personnages

Tiger and Leo 3D Models: STL Files for Printing

12377 modèles

Toutes les catégories de modèles 3D

Le catalogue complet des thèmes, de la maison à la CNC, avec une recherche sur tous les sites connectés.

Ouvrir le catalogue des catégories