Pièces d’imprimante

Stepper Motor Housing 3D Models and STL Files

This collection gathers 3D models for stepper motor housings: dust covers, mounts, endstop brackets and damper shells. The files come from several platforms and are made for 3D printing, so shapes and mounting options can be compared in one place. It helps when a motor needs a cover, a bracket or a quieter mount and you want to see what has already been drawn. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Le texte de cette collection est rédigé en anglais ; la recherche, elle, fonctionne dans toutes les langues.

Une collection Polyzon · 48 modèles sur 4 plateformes

Comment cette collection est composée

Polyzon compose cette collection à partir des résultats de recherche des plateformes connectées. Les doublons et les modèles sans aperçu sont retirés, les correspondances faibles sont placées à la fin, et le reste suit l’ordre de la recherche. Les modèles appartiennent à leurs auteurs : consultez les conditions sur la page de chaque modèle.

Règles de sélection : la rédaction de Polyzon · Texte mis à jour le 12/10/2026

Voir la collection Tout afficher : 12753 modèles →
Collection

Par où commencer

Tous les modèles de cette collection

Tout afficher : 12753 modèles
À propos de la catégorie

«Stepper Motor Housing 3D Models and STL Files»

The models fall into a few clear groups. Dust covers and caps close off the motor body, often with a small opening for the shaft or cable. Mounts and brackets hold a motor against a frame, rail or panel, while endstop housings are shaped around one axis of a particular printer. Damper and heatsink shells sit between the motor and its mount or add surface area for cooling.

Before printing, check the frame size the model was drawn for, since NEMA 17 and NEMA 23 motors differ in bolt spacing and body width. Look at the number of parts, how they join, and whether the author notes supports, a material or a layer height. Photos of finished prints show how a cover sits around cables and screws better than a render does.

If the first results are too narrow, try other words for the same part: motor cover, motor cap, mount, bracket, endstop housing, damper, or the frame size on its own. Related searches such as belt tensioners, fan ducts or electronics enclosures often lead to models drawn for the same machine. Adding the axis or the printer model you own narrows the list further.

FAQ

Questions fréquentes

What is the difference between a stepper motor cover and a mount?
A cover wraps the motor body to keep out dust and can hide cables, while a mount fixes the motor to a frame or rail. Some models combine both in a single part.
How do I know which motor size a housing fits?
Check the frame size and bolt spacing listed on the model page, such as NEMA 17 or NEMA 23, and compare them with the motor you have. Shaft diameter and body length matter as well.
Do these housings need supports?
It depends on the shape: flat covers often print without them, while brackets with overhangs may need them. The author's page usually states the orientation and whether supports are used.
Can a housing reduce motor noise?
Damper shells and mounts that separate the motor from the frame are often used for that purpose, but the result depends on the printer and the material. Check the author's notes and photos before printing.
Voir aussi
Véhicules

Modèles 3D de moteur V8 à imprimer

4951 modèles
Véhicules

Modèles 3D de moteurs à imprimer

189141 modèles
Pièces d’imprimante

Boîtier et enceinte pour imprimante 3D

12663 modèles
Objets

Engine Impeller 3D Models: Turbo, Jet and Pump STL

1274 modèles
Objets

Motor Bushing STL Models for 3D Printing

2053 modèles
Véhicules

Moteur V4 à imprimer en 3D : modèles STL

2411 modèles

Toutes les catégories de modèles 3D

Le catalogue complet des thèmes, de la maison à la CNC, avec une recherche sur tous les sites connectés.

Ouvrir le catalogue des catégories