プリンターパーツ

Stepper Motor Housing 3D Models and STL Files

This collection gathers 3D models for stepper motor housings: dust covers, mounts, endstop brackets and damper shells. The files come from several platforms and are made for 3D printing, so shapes and mounting options can be compared in one place. It helps when a motor needs a cover, a bracket or a quieter mount and you want to see what has already been drawn. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

このコレクションの本文は英語で書かれています。検索自体はどの言語でも使えます。

Polyzonのコレクション · モデル48件 4サイトから収集

このコレクションの選定方法

このコレクションは、Polyzonが対応サイトの検索結果をもとに作成しています。重複やプレビューのないモデルは除外し、関連性の低いものは後ろに回し、それ以外は検索結果の順に並べています。モデルの権利は各作者にあります。利用条件は各モデルのページでご確認ください。

選定基準：Polyzon編集部 · 本文の更新日：2026年10月12日

コレクションを見る モデル12753件をすべて表示 →
コレクション

まずはここから

このコレクションのすべてのモデル

モデル12753件をすべて表示
カテゴリについて

«Stepper Motor Housing 3D Models and STL Files»

The models fall into a few clear groups. Dust covers and caps close off the motor body, often with a small opening for the shaft or cable. Mounts and brackets hold a motor against a frame, rail or panel, while endstop housings are shaped around one axis of a particular printer. Damper and heatsink shells sit between the motor and its mount or add surface area for cooling.

Before printing, check the frame size the model was drawn for, since NEMA 17 and NEMA 23 motors differ in bolt spacing and body width. Look at the number of parts, how they join, and whether the author notes supports, a material or a layer height. Photos of finished prints show how a cover sits around cables and screws better than a render does.

If the first results are too narrow, try other words for the same part: motor cover, motor cap, mount, bracket, endstop housing, damper, or the frame size on its own. Related searches such as belt tensioners, fan ducts or electronics enclosures often lead to models drawn for the same machine. Adding the axis or the printer model you own narrows the list further.

FAQ

よくある質問

What is the difference between a stepper motor cover and a mount?
A cover wraps the motor body to keep out dust and can hide cables, while a mount fixes the motor to a frame or rail. Some models combine both in a single part.
How do I know which motor size a housing fits?
Check the frame size and bolt spacing listed on the model page, such as NEMA 17 or NEMA 23, and compare them with the motor you have. Shaft diameter and body length matter as well.
Do these housings need supports?
It depends on the shape: flat covers often print without them, while brackets with overhangs may need them. The author's page usually states the orientation and whether supports are used.
Can a housing reduce motor noise?
Damper shells and mounts that separate the motor from the frame are often used for that purpose, but the result depends on the printer and the material. Check the author's notes and photos before printing.
関連
乗り物

V8 Engine 3D Models and STL Files for Printing

モデル4951件
乗り物

3D Models of Engines: Jet, V8 and Fidget STL Files

モデル189141件
プリンターパーツ

3D Printing Enclosure and Housing STL Models

モデル12663件
オブジェクト

Engine Impeller 3D Models: Turbo, Jet and Pump STL

モデル1274件
オブジェクト

Motor Bushing STL Models for 3D Printing

モデル2053件
乗り物

V4 Engine 3D Models: STL Files for Printing

モデル2411件

3Dモデルのカテゴリ一覧

暮らし・日用品からCNCまで、すべてのテーマをそろえたカタログ。対応サイトを横断して検索できます。

カテゴリ一覧を開く