Électronique

Cable Mounting Clips and Brackets: 3D Models

This collection gathers STL files for holding cables in place: screw-on clips, removable clips, tie mounts, P-clips and wall or ceiling brackets. The models differ mainly in how they attach and in the cable diameter they are drawn around. It is useful when you are routing wires along a wall, desk or machine and want a holder that matches your cable instead of a generic one. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Le texte de cette collection est rédigé en anglais ; la recherche, elle, fonctionne dans toutes les langues.

Une collection Polyzon · 48 modèles sur 6 plateformes

Comment cette collection est composée

Polyzon compose cette collection à partir des résultats de recherche des plateformes connectées. Les doublons et les modèles sans aperçu sont retirés, les correspondances faibles sont placées à la fin, et le reste suit l’ordre de la recherche. Les modèles appartiennent à leurs auteurs : consultez les conditions sur la page de chaque modèle.

Règles de sélection : la rédaction de Polyzon · Texte mis à jour le 13/10/2026

Voir la collection Tout afficher : 251704 modèles →
Collection

Par où commencer

Tous les modèles de cette collection

Tout afficher : 251704 modèles
À propos de la catégorie

«Cable Mounting Clips and Brackets: 3D Models»

Most entries fall into a few groups. Screw-mount clips and brackets are fixed with a screw or a nail and stay where you put them. Removable clips are shaped so the cable can be pushed in and taken out again, which helps when wires are added or moved. Cable tie mounts and P-clips work with a tie or a band, and hook-style brackets hold a cable or a cord that hangs from above. A smaller group is drawn for one cable type, such as coaxial or wire rope, where the outer diameter matters more than the routing.

When choosing a model, open the author's page and read the dimensions first: the inner diameter, the wall thickness and the screw hole size decide whether your cable and fastener fit. Check how many parts the model has and whether it is meant to be glued, screwed or printed as one piece. Look at whether the author lists supports, material and print orientation, and compare those notes with photos of real prints. For a clip that bends or snaps, the orientation on the bed and the material choice affect how it behaves more than the shape alone.

If the results feel narrow, try other words for the same object: cable clip, wire holder, cable guide, cable tie base, P-clip, saddle, bracket or mount. Adding the context helps too, such as desk, wall, ceiling, under-desk, server rack, printer frame or car. You can also search by the cable itself, for example coaxial, USB, mains or wire rope, or by the fastener you plan to use, such as screw, nail, adhesive pad or tie. Combining a size with a mounting method usually narrows the list faster than either term alone.

FAQ

Questions fréquentes

How do I pick the right inner diameter for a cable clip?
Measure the cable's outer diameter, including any sleeve or braid, and compare it with the dimensions the author lists. A clip drawn slightly larger than the cable is easier to insert, while a tight fit holds better but can pinch soft insulation.
Do cable mounting clips need supports?
It depends on the shape. Flat-backed clips and pads often print without them, while hooks, overhangs and round saddles may need supports on the underside. The author's page usually states the orientation and whether supports were used.
Which material works for clips that flex?
Clips that open and close rely on the material's flexibility, so the choice matters as much as the geometry. Check what the author printed with and how the part is oriented on the bed, since layer direction affects where a clip bends or cracks.
Can I scale a clip to fit a different cable?
Scaling changes the wall thickness and the screw hole along with the opening, so a scaled clip may no longer fit its fastener. It is often better to look for a model drawn for your diameter or to adjust the opening in the source file.
Voir aussi
Maison et quotidien

Cable Mounting Brackets: 3D Models and STL Files

271931 modèles
Électronique

Cable Organizer 3D Models and STL Files

222818 modèles
Bureau

Cable Holder STL Models for Desk and 3D Printer

578576 modèles
Maison et quotidien

3D models for Wall Cable Mounts and Clips

5287 modèles
Électronique

Cable Tee and Cable Management 3D Models

12437 modèles
Outils et équipement

3D Models of Fastenings and Mounts for 3D Printing

728982 modèles

Toutes les catégories de modèles 3D

Le catalogue complet des thèmes, de la maison à la CNC, avec une recherche sur tous les sites connectés.

Ouvrir le catalogue des catégories