Pièces d’imprimante

Fog Light and PTFE Brackets: 3D Models to Print

This collection gathers 3D models for two related jobs: mounting fog lights on a car and routing PTFE tubing on a 3D printer. It covers car-specific lamp brackets, tube guides and adapters for AMS-style feeders, and brackets for dryers and frames. The mix is useful because both tasks come down to the same problem — holding a part at a fixed angle with holes that line up. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Le texte de cette collection est rédigé en anglais ; la recherche, elle, fonctionne dans toutes les langues.

Une collection Polyzon · 48 modèles sur 6 plateformes

Comment cette collection est composée

Polyzon compose cette collection à partir des résultats de recherche des plateformes connectées. Les doublons et les modèles sans aperçu sont retirés, les correspondances faibles sont placées à la fin, et le reste suit l’ordre de la recherche. Les modèles appartiennent à leurs auteurs : consultez les conditions sur la page de chaque modèle.

Règles de sélection : la rédaction de Polyzon · Texte mis à jour le 14/10/2026

Voir la collection Tout afficher : 2953 modèles →
Collection

Par où commencer

Tous les modèles de cette collection

Tout afficher : 2953 modèles
À propos de la catégorie

«Fog Light and PTFE Brackets: 3D Models to Print»

Car brackets are usually shaped around one bumper or lamp housing, so they differ by mounting points, angle and hole spacing. Printer brackets differ by what they hold: a tube coupler, a four-in-one adapter, a dryer connector or a cable run. Reinforcement brackets are a separate group, built with thicker walls or extra ribs to stiffen a frame or a table mount.

When choosing a model, open the author's page and compare the listed dimensions with the space you have. Check hole diameter and spacing, screw type, number of parts and whether the design is printed as one piece or assembled. Look at the material and settings the author lists, and at photos of real prints, since thin arms and small screw bosses behave differently in PLA, PETG or a filled filament. If the geometry has overhangs or deep pockets, see whether supports are needed and how they are removed.

To widen the search, try synonyms: fog lamp mount, light bracket, lamp holder, bumper bracket, or tube guide, PTFE holder, adapter mount, cable guide. Adding the car model, the printer series or the accessory name narrows results quickly. Related topics worth checking are bumper trim parts, wiring clips, filament dryer stands and spool holders, which often share the same fastening pattern.

FAQ

Questions fréquentes

How can I tell whether a fog light bracket matches my car?
The model page usually names the car model and generation, and lists hole spacing, angle and overall size. Compare those figures with the mounting points on your bumper or lamp housing before printing.
Which material is used for these brackets?
Authors often list PETG, ABS, ASA or a fiber-filled filament for parts that see heat or load. The page states the material and settings they used, so start from that and adjust to your printer.
Do these brackets need supports?
It depends on the shape: flat plates and L-profiles often print without them, while deep pockets and overhanging arms may need them. Check the author's notes and photos of finished prints.
Why do results mix car parts and printer parts?
The abbreviation for fog lights and the name of the printer tubing look alike, so the same query returns both. Add a car model or a printer series to push the results toward one group.
Voir aussi
Outils et équipement

PTF and PTFE 3D Models: Tubes, Brackets, Adapters

9285 modèles
Objets

3D Models of Brackets and Mounts for 3D Printing

711402 modèles
Pièces d’imprimante

PTFE Tube Guides and Frame STL Models for 3D Printing

2443 modèles
Pièces d’imprimante

Lada Fog Light Adapters: 3D Models and STL Files

576 modèles
Outils et équipement

PTFE and Fog Light Mounts: 3D Models to Print

200051 modèles
Pièces d’imprimante

LED Fog Light Brackets and Light Mounts: 3D Models

74727 modèles

Toutes les catégories de modèles 3D

Le catalogue complet des thèmes, de la maison à la CNC, avec une recherche sur tous les sites connectés.

Ouvrir le catalogue des catégories