プリンターパーツ

Fog Light and PTFE Brackets: 3D Models to Print

This collection gathers 3D models for two related jobs: mounting fog lights on a car and routing PTFE tubing on a 3D printer. It covers car-specific lamp brackets, tube guides and adapters for AMS-style feeders, and brackets for dryers and frames. The mix is useful because both tasks come down to the same problem — holding a part at a fixed angle with holes that line up. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

このコレクションの本文は英語で書かれています。検索自体はどの言語でも使えます。

Polyzonのコレクション · モデル48件 6サイトから収集

このコレクションの選定方法

このコレクションは、Polyzonが対応サイトの検索結果をもとに作成しています。重複やプレビューのないモデルは除外し、関連性の低いものは後ろに回し、それ以外は検索結果の順に並べています。モデルの権利は各作者にあります。利用条件は各モデルのページでご確認ください。

選定基準：Polyzon編集部 · 本文の更新日：2026年10月14日

コレクションを見る モデル2953件をすべて表示 →
コレクション

まずはここから

このコレクションのすべてのモデル

モデル2953件をすべて表示
カテゴリについて

«Fog Light and PTFE Brackets: 3D Models to Print»

Car brackets are usually shaped around one bumper or lamp housing, so they differ by mounting points, angle and hole spacing. Printer brackets differ by what they hold: a tube coupler, a four-in-one adapter, a dryer connector or a cable run. Reinforcement brackets are a separate group, built with thicker walls or extra ribs to stiffen a frame or a table mount.

When choosing a model, open the author's page and compare the listed dimensions with the space you have. Check hole diameter and spacing, screw type, number of parts and whether the design is printed as one piece or assembled. Look at the material and settings the author lists, and at photos of real prints, since thin arms and small screw bosses behave differently in PLA, PETG or a filled filament. If the geometry has overhangs or deep pockets, see whether supports are needed and how they are removed.

To widen the search, try synonyms: fog lamp mount, light bracket, lamp holder, bumper bracket, or tube guide, PTFE holder, adapter mount, cable guide. Adding the car model, the printer series or the accessory name narrows results quickly. Related topics worth checking are bumper trim parts, wiring clips, filament dryer stands and spool holders, which often share the same fastening pattern.

FAQ

よくある質問

How can I tell whether a fog light bracket matches my car?
The model page usually names the car model and generation, and lists hole spacing, angle and overall size. Compare those figures with the mounting points on your bumper or lamp housing before printing.
Which material is used for these brackets?
Authors often list PETG, ABS, ASA or a fiber-filled filament for parts that see heat or load. The page states the material and settings they used, so start from that and adjust to your printer.
Do these brackets need supports?
It depends on the shape: flat plates and L-profiles often print without them, while deep pockets and overhanging arms may need them. Check the author's notes and photos of finished prints.
Why do results mix car parts and printer parts?
The abbreviation for fog lights and the name of the printer tubing look alike, so the same query returns both. Add a car model or a printer series to push the results toward one group.
関連
工具・機材

PTF and PTFE 3D Models: Tubes, Brackets, Adapters

モデル9285件
オブジェクト

3D Models of Brackets and Mounts for 3D Printing

モデル711402件
プリンターパーツ

PTFE Tube Guides and Frame STL Models for 3D Printing

モデル2443件
プリンターパーツ

Lada Fog Light Adapters: 3D Models and STL Files

モデル576件
工具・機材

PTFE and Fog Light Mounts: 3D Models to Print

モデル200051件
プリンターパーツ

LED Fog Light Brackets and Light Mounts: 3D Models

モデル74727件

3Dモデルのカテゴリ一覧

暮らし・日用品からCNCまで、すべてのテーマをそろえたカタログ。対応サイトを横断して検索できます。

カテゴリ一覧を開く