Outils et équipement

3D Models of Panels: Electrical, Light and Mount STL

This collection gathers 3D models built around panels in several senses: electrical faceplates and connector mounts, decorative light panels, machine side panels with clips, and organizer boards. It helps when you need a flat part with cutouts, a mounting surface or a cover rather than a figurine. Most entries are STL files meant for a desktop 3D printer, and their scale and hardware details vary a lot from one author to another. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Le texte de cette collection est rédigé en anglais ; la recherche, elle, fonctionne dans toutes les langues.

Une collection Polyzon · 48 modèles sur 5 plateformes

Comment cette collection est composée

Polyzon compose cette collection à partir des résultats de recherche des plateformes connectées. Les doublons et les modèles sans aperçu sont retirés, les correspondances faibles sont placées à la fin, et le reste suit l’ordre de la recherche. Les modèles appartiennent à leurs auteurs : consultez les conditions sur la page de chaque modèle.

Règles de sélection : la rédaction de Polyzon · Texte mis à jour le 15/10/2026

Voir la collection Tout afficher : 104177 modèles →
Collection

Par où commencer

Tous les modèles de cette collection

Tout afficher : 104177 modèles
À propos de la catégorie

«3D Models of Panels: Electrical, Light and Mount STL»

The kinds of models here differ mainly in what the panel has to do. Electrical and connector panels are plates with openings for plugs, sockets or switches, often sized around a standard cutout. Light panel replicas and wall panels are mostly decorative and depend on how the pieces join and how light passes through them. Printer side panels, clips and latches are functional parts that follow the dimensions of a specific frame or extrusion, while organizer boards and trays are about holding tools or small parts.

When choosing a model, open the author's page and read the listed dimensions first: overall size, plate thickness, hole diameter and the spacing between holes. Check how many parts the panel has, whether it is a single piece or an assembly, and whether the author notes that supports are needed for overhangs. The material and settings the author lists matter for thin plates, since a panel printed in a brittle material behaves differently from one in a tougher one. Photos of real prints show how the surface, edges and fit turned out.

To widen or narrow the search, try other words for the same object: faceplate, mounting plate, bezel, backplate, cover or bracket. Related queries help too, such as connector mount, DIN rail, wall mount, enclosure, pegboard or control console. If you are matching an existing part, search by the cutout or thread it uses, and compare a few models before printing, because two panels with the same purpose can differ in thickness and fastener layout.

FAQ

Questions fréquentes

What counts as a panel model in 3D printing?
Usually a flat or slightly shaped part with cutouts, holes or a mounting surface: faceplates for connectors, decorative wall panels, covers for machines, or boards that hold tools. The common feature is that the panel is the main body of the model, not an accessory to something else.
How do I match a printed panel to a connector or switch?
Measure the cutout or thread on the real part and compare it with the dimensions listed on the model page. If the author gives a parametric file, you can adjust hole size and spacing yourself; otherwise scale the model and test the fit on a small section first.
Do panel models need supports?
It depends on the geometry. Plates printed flat usually need none, while panels with recesses, clips or overhanging edges may need them. The author's page often states this, and the orientation shown in the photos is a useful guide.
How can I attach a printed panel to a wall or frame?
Look at the mounting features in the model: screw holes, clip tabs, slots for rivets or grooves for an extrusion profile. Check the hole spacing against your frame or rail before printing, and note the plate thickness if the fasteners have a limited grip range.
Voir aussi
Outils et équipement

Adjustable Hinge STL Models for 3D Printing

2763 modèles
Outils et équipement

3D Models for Hose and Nozzle Holders on Barrels

11469 modèles
Outils et équipement

Stihl MS 180 Lever Lock 3D Models and STL Files

2621 modèles
Outils et équipement

3D Models for Profile Pipe and Pipe Fittings

3826 modèles
Outils et équipement

1 1/4 to 1/2 Adapter STL Models for 3D Printing

13578 modèles
Outils et équipement

Profile Cutting Jigs: 3D Models and STL Files

22100 modèles

Toutes les catégories de modèles 3D

Le catalogue complet des thèmes, de la maison à la CNC, avec une recherche sur tous les sites connectés.

Ouvrir le catalogue des catégories