Jardin

Pest Trap 3D Models and STL Files for 3D Printing

This collection gathers 3D models for pest traps: lidded containers for flies and wasps, bait stations for ants and roaches, live-catch mouse designs, and slug or snail traps for gardens. Each listing comes from a different author, so the geometry, part count and print settings vary from one model to the next. It is a starting point for anyone who wants to print a trap on a 3D printer and adapt it to a specific insect or rodent. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Le texte de cette collection est rédigé en anglais ; la recherche, elle, fonctionne dans toutes les langues.

Une collection Polyzon · 48 modèles sur 5 plateformes

Comment cette collection est composée

Polyzon compose cette collection à partir des résultats de recherche des plateformes connectées. Les doublons et les modèles sans aperçu sont retirés, les correspondances faibles sont placées à la fin, et le reste suit l’ordre de la recherche. Les modèles appartiennent à leurs auteurs : consultez les conditions sur la page de chaque modèle.

Règles de sélection : la rédaction de Polyzon · Texte mis à jour le 13/10/2026

Voir la collection Tout afficher : 4957 modèles →
Collection

Par où commencer

Tous les modèles de cette collection

Tout afficher : 4957 modèles
À propos de la catégorie

«Pest Trap 3D Models and STL Files for 3D Printing»

The designs fall into a few families. Flying-insect traps usually work as a container with a funnel or slit entry, sometimes with a lid or a jar thread, and are meant to hold a lure or liquid. Ant and roach models tend to be low bait stations with narrow openings, while mouse designs split between live-catch boxes and flap or trigger mechanisms. Garden versions for slugs and snails are often simple open cups sunk into soil, and sticky-card holders are flat frames that take a replaceable sheet.

When choosing a model, look at the entry size against the pest you have in mind, since a hole wide enough for a wasp will also let smaller insects out. Check the number of parts and how they join, whether the author calls for supports, and which material and settings are listed. For anything kept outdoors, a filament that handles moisture and sunlight is worth considering, and drainage holes or a removable lid make emptying easier. Photos of real prints on the model page show how the openings and walls actually come out.

Search results widen quickly if you try other wordings. Terms like insect trap, bug catcher, bait station, fly catcher or rodent trap bring up designs that a single phrase misses, and adding a target such as wasp, fruit fly, cockroach or slug narrows the list. Related topics worth browsing include garden pest control, camping and greenhouse setups, and small storage or jar-thread parts that many of these traps are built around.

FAQ

Questions fréquentes

Do pest trap models need supports?
It depends on the shape. Funnel entries, overhangs inside a container and thin trigger arms often need them, while flat sticky-card frames and simple cups usually print without. The author's page normally states what was used.
Which filament works for a trap kept outdoors?
PLA is common for indoor bait stations, but outdoor traps sit in sun and rain, where PETG, ASA or a similar weather-resistant filament holds up better. Check what the author lists before printing.
How do I adjust a trap for a different insect?
Scale the model in the slicer or edit the entry opening so it matches the pest you are targeting, then re-check wall thickness. Very small openings may need a finer nozzle to print cleanly.
Can a printed trap be emptied and used again?
Many designs have a removable lid, a screw top or a sliding base so the contents can be emptied. Whether that works well depends on how the parts fit after printing, so test the assembly before placing the trap.
Voir aussi
Maison et quotidien

3D Models of Traps: Insect, Prop and Terrain STL

65236 modèles
Jardin

3D Printed Wasp Traps: STL Models for Bottles and Jars

12124 modèles
Maison et quotidien

Large Fly Trap 3D Models: STL Files for Jars and Bottles

6712 modèles
Jardin

3D Models for Cactus and Succulent Pots | STL Files

70496 modèles
Jardin

Forest Spirit STL Garden Sculptures and Feeders

2198 modèles
Jardin

Honeycomb Plant Supports: 3D Models and STL Files

11339 modèles

Toutes les catégories de modèles 3D

Le catalogue complet des thèmes, de la maison à la CNC, avec une recherche sur tous les sites connectés.

Ouvrir le catalogue des catégories