Outils et équipement

Pneumatic 3D Models: Fittings, Cylinders, Tool Holders

This collection gathers 3D printing models built around compressed air: fittings and adapters, cylinders and motors, holders for air tools, and a few novelty launchers. Most of it is small hardware that solves a specific connection problem, either inside a 3D printer or on a workshop air line. Browsing here is useful when you need a bracket, an adapter or a moving part and want to see how other makers approached the same geometry. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Le texte de cette collection est rédigé en anglais ; la recherche, elle, fonctionne dans toutes les langues.

Une collection Polyzon · 48 modèles sur 4 plateformes

Comment cette collection est composée

Polyzon compose cette collection à partir des résultats de recherche des plateformes connectées. Les doublons et les modèles sans aperçu sont retirés, les correspondances faibles sont placées à la fin, et le reste suit l’ordre de la recherche. Les modèles appartiennent à leurs auteurs : consultez les conditions sur la page de chaque modèle.

Règles de sélection : la rédaction de Polyzon · Texte mis à jour le 12/10/2026

Voir la collection Tout afficher : 5006 modèles →
Collection

Par où commencer

Tous les modèles de cette collection

Tout afficher : 5006 modèles
À propos de la catégorie

«Pneumatic 3D Models: Fittings, Cylinders, Tool Holders»

The fittings group is the largest and the most varied. Some pieces adapt a printer's extruder to a push-in connector or an M10 thread, others are standalone clips and caps that join tubing, bottles or quick-disconnect couplers. Actuators form a separate group: parametric cylinders, syringe-driven arms and small air motors, where the interesting part is how the piston, seals and ports are modelled. Holders and organizers sit between the two, since they are usually simple brackets shaped around a specific tool or hose.

When you open a model page, start with the thread and tube sizes, because a connector drawn for one diameter will not close around another. Then look at the part count and whether the model is meant to be glued, screwed or snapped together, and at the overhangs and internal channels that decide how much support the print needs. The material and settings the author lists are worth reading too: parts that flex or slide behave differently in rigid and in tougher filaments, and photos of real prints show how the surfaces and threads came out.

If the results feel narrow, widen the wording rather than the topic. Air fitting, push-in connector, Bowden coupler, quick disconnect, hose barb and PTFE adapter all describe related hardware, and searching by thread standard such as M5, M6, M10 or NPT often finds parts that a plain keyword misses. Related directions include compressor accessories, workshop storage, printer extruder parts and simple pneumatic toys, which reuse the same fittings and cylinders in a different context.

FAQ

Questions fréquentes

How do I find the right fitting size for my setup?
Measure the thread and the outer diameter of the tube you want to connect, then search using those values together with the connector type. Model pages usually state the thread and tube size in the title or description, so compare them before printing.
Which filament works for pneumatic parts?
Rigid brackets and holders are commonly printed in PLA, while parts that flex, slide or take pressure are often made in PETG, ABS or a similar tougher filament. The author's page is the place to check what the model was designed around.
Do these models need supports?
It depends on the shape. Parts with internal air channels, side ports or large overhangs usually need them, while flat brackets and clips often print without. Look at the orientation in the author's photos and notes before slicing.
Can I adapt a model to a different thread or tube size?
Yes, if the file is parametric or if you are comfortable editing the mesh. Scaling the whole part changes every dimension, including the ones that must stay accurate, so adjusting only the connector section is usually the better route.
Voir aussi
Jouets et figurines

Pneumatic LEGO 3D Models: Tanks, Valves, Connectors

26607 modèles
Loisirs et makers

Pneumatic 3D Models: Fittings, Air Engines, STL Parts

2355 modèles
Outils et équipement

Transom Intake Fitting 3D Models and STL Files

6031 modèles
Outils et équipement

Horizontal Gears and Gearboxes: 3D Models and STL

3249 modèles
Outils et équipement

M34 Nut 3D Models: STL Fasteners and Knobs

121601 modèles
Outils et équipement

Coupler 3D Models: Shaft, PTFE, Rail and Magazine STL

16959 modèles

Toutes les catégories de modèles 3D

Le catalogue complet des thèmes, de la maison à la CNC, avec une recherche sur tous les sites connectés.

Ouvrir le catalogue des catégories