Alet ve ekipman

Pneumatic 3D Models: Fittings, Cylinders, Tool Holders

This collection gathers 3D printing models built around compressed air: fittings and adapters, cylinders and motors, holders for air tools, and a few novelty launchers. Most of it is small hardware that solves a specific connection problem, either inside a 3D printer or on a workshop air line. Browsing here is useful when you need a bracket, an adapter or a moving part and want to see how other makers approached the same geometry. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 4 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 12.10.2026

Koleksiyonu gör Tümünü göster: 5006 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 5006 model
Kategori hakkında

«Pneumatic 3D Models: Fittings, Cylinders, Tool Holders»

The fittings group is the largest and the most varied. Some pieces adapt a printer's extruder to a push-in connector or an M10 thread, others are standalone clips and caps that join tubing, bottles or quick-disconnect couplers. Actuators form a separate group: parametric cylinders, syringe-driven arms and small air motors, where the interesting part is how the piston, seals and ports are modelled. Holders and organizers sit between the two, since they are usually simple brackets shaped around a specific tool or hose.

When you open a model page, start with the thread and tube sizes, because a connector drawn for one diameter will not close around another. Then look at the part count and whether the model is meant to be glued, screwed or snapped together, and at the overhangs and internal channels that decide how much support the print needs. The material and settings the author lists are worth reading too: parts that flex or slide behave differently in rigid and in tougher filaments, and photos of real prints show how the surfaces and threads came out.

If the results feel narrow, widen the wording rather than the topic. Air fitting, push-in connector, Bowden coupler, quick disconnect, hose barb and PTFE adapter all describe related hardware, and searching by thread standard such as M5, M6, M10 or NPT often finds parts that a plain keyword misses. Related directions include compressor accessories, workshop storage, printer extruder parts and simple pneumatic toys, which reuse the same fittings and cylinders in a different context.

FAQ

Sıkça sorulan sorular

How do I find the right fitting size for my setup?
Measure the thread and the outer diameter of the tube you want to connect, then search using those values together with the connector type. Model pages usually state the thread and tube size in the title or description, so compare them before printing.
Which filament works for pneumatic parts?
Rigid brackets and holders are commonly printed in PLA, while parts that flex, slide or take pressure are often made in PETG, ABS or a similar tougher filament. The author's page is the place to check what the model was designed around.
Do these models need supports?
It depends on the shape. Parts with internal air channels, side ports or large overhangs usually need them, while flat brackets and clips often print without. Look at the orientation in the author's photos and notes before slicing.
Can I adapt a model to a different thread or tube size?
Yes, if the file is parametric or if you are comfortable editing the mesh. Scaling the whole part changes every dimension, including the ones that must stay accurate, so adjusting only the connector section is usually the better route.
İlgili
Oyuncaklar ve figürler

Pneumatic LEGO 3D Models: Tanks, Valves, Connectors

26607 model
Hobi ve kendin yap

Pneumatic 3D Models: Fittings, Air Engines, STL Parts

2355 model
Alet ve ekipman

Transom Intake Fitting 3D Models and STL Files

6031 model
Alet ve ekipman

Horizontal Gears and Gearboxes: 3D Models and STL

3249 model
Alet ve ekipman

M34 Nut 3D Models: STL Fasteners and Knobs

121601 model
Alet ve ekipman

Coupler 3D Models: Shaft, PTFE, Rail and Magazine STL

16959 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç