Veicoli

3D Models for Car Speaker Grilles and Adapters

This collection gathers 3D printing files for car audio trim: round grilles for common driver sizes, honeycomb and hex covers, tweeter caps, and adapters that fit speakers into factory door openings. Most entries are small parts that a home 3D printer can handle in one piece. It is useful when a stock grille is missing, cracked, or you are fitting a different speaker size than the car came with. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Il testo di questa raccolta è in inglese; la ricerca funziona in qualsiasi lingua.

Una raccolta di Polyzon · 47 modelli da 3 siti

Come è composta questa raccolta

Polyzon compone questa raccolta a partire dai risultati di ricerca dei siti collegati. I doppioni e i modelli senza anteprima vengono rimossi, le corrispondenze deboli finiscono in fondo e il resto mantiene l’ordine dei risultati. I modelli appartengono ai rispettivi autori: verifica le condizioni sulla pagina di ciascun modello.

Criteri di selezione a cura della redazione di Polyzon · Testo aggiornato: 14/10/2026

Vedi la raccolta Mostra tutti: 2403 modelli →
Raccolta

Da dove iniziare

Tutti i modelli di questa raccolta

Mostra tutti: 2403 modelli
Informazioni sulla categoria

«3D Models for Car Speaker Grilles and Adapters»

The models fall into a few groups. Round grilles are usually described by driver size, in either millimeters or inches, and differ in how open the pattern is: simple bars, slots, or a honeycomb mesh. Adapters and bases change the mounting hole or raise the speaker away from the door panel, while tweeter and dash covers are smaller caps with their own fixing points. Subwoofer and parametric grilles tend to be larger and are often generated from adjustable parameters rather than fixed geometry.

Before printing, compare the model's stated dimensions with your own measurements: outer diameter, cutout diameter, screw hole spacing, and the depth left for cone travel. Check how the part is oriented in the file and whether the author notes supports, since thin mesh sections and tall rings behave differently on the plate. Look at the material and settings the author lists, and at photos of real prints, to judge wall thickness and how the pattern will look once installed.

If the first search gives few results, try the alternate spellings grille, grill, mesh, cover, cap, ring, spacer, and adapter. Adding a diameter in both units, such as 165 mm and 6.5 inch, widens the match, and terms like door, dash, parcel shelf or subwoofer narrow it to the position you are working on. Related searches for speaker rings, baffles and mounting plates often surface files that the grille terms miss.

FAQ

Domande frequenti

How do I pick a grille that fits my speaker?
Measure the driver's outer diameter and the opening it sits in, then compare both with the dimensions on the model page. Titles often give the size in inches and millimeters, but the screw hole spacing and depth still need checking.
Do these grilles need supports when printing?
It depends on the shape. Flat mesh covers usually print without them, while tall rings and overhanging edges may need support. The author's page often states the orientation and whether supports were used.
Can I scale a grille to fit a different driver?
Scaling changes screw holes, wall thickness and mesh spacing along with the diameter, so the result may not line up. A model with matching dimensions, or an editable parametric file, is usually a better starting point.
What should I check about the material for a car interior?
Look at the material the author lists and think about where the part sits, since dashboards and doors get hot in sunlight. Photos of installed prints show how the chosen material holds up in that position.
Correlati
Oggetti

Car Speaker Grille STL Models for 3D Printing

210538 modelli
Veicoli

RAV4 Speaker Grille 3D Models and STL Files

2421 modelli
Elettronica

Speaker Protective Grilles: 3D Models and STL Files

3781 modelli
Elettronica

Speaker Protective Grilles: 3D Models and STL Files

1417 modelli
Elettronica

8-Inch Speaker Grille STL Models to 3D Print

2676 modelli
Elettronica

Speaker Protective Grilles: 3D Models and STL Files

1314 modelli

Tutte le categorie di modelli 3D

Il catalogo completo dei temi, dalla casa alla lavorazione CNC, con ricerca su tutti i siti collegati.

Apri il catalogo delle categorie