Veículos

3D Models for Car Speaker Grilles and Adapters

This collection gathers 3D printing files for car audio trim: round grilles for common driver sizes, honeycomb and hex covers, tweeter caps, and adapters that fit speakers into factory door openings. Most entries are small parts that a home 3D printer can handle in one piece. It is useful when a stock grille is missing, cracked, or you are fitting a different speaker size than the car came with. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

O texto desta coleção está em inglês; a busca funciona em qualquer idioma.

Uma coleção do Polyzon · 47 modelos de 3 sites

Como esta coleção é montada

O Polyzon monta esta coleção a partir dos resultados de busca dos sites conectados. Repetições e modelos sem prévia são removidos, correspondências fracas vão para o final e o restante segue a ordem da busca. Os modelos pertencem aos seus autores — confira os termos na página de cada modelo.

Regras de seleção: equipe editorial do Polyzon · Texto atualizado em 14/10/2026

Ver a coleção Mostrar todos: 2403 modelos →
Coleção

Comece por aqui

Todos os modelos desta coleção

Mostrar todos: 2403 modelos
Sobre a categoria

«3D Models for Car Speaker Grilles and Adapters»

The models fall into a few groups. Round grilles are usually described by driver size, in either millimeters or inches, and differ in how open the pattern is: simple bars, slots, or a honeycomb mesh. Adapters and bases change the mounting hole or raise the speaker away from the door panel, while tweeter and dash covers are smaller caps with their own fixing points. Subwoofer and parametric grilles tend to be larger and are often generated from adjustable parameters rather than fixed geometry.

Before printing, compare the model's stated dimensions with your own measurements: outer diameter, cutout diameter, screw hole spacing, and the depth left for cone travel. Check how the part is oriented in the file and whether the author notes supports, since thin mesh sections and tall rings behave differently on the plate. Look at the material and settings the author lists, and at photos of real prints, to judge wall thickness and how the pattern will look once installed.

If the first search gives few results, try the alternate spellings grille, grill, mesh, cover, cap, ring, spacer, and adapter. Adding a diameter in both units, such as 165 mm and 6.5 inch, widens the match, and terms like door, dash, parcel shelf or subwoofer narrow it to the position you are working on. Related searches for speaker rings, baffles and mounting plates often surface files that the grille terms miss.

FAQ

Perguntas frequentes

How do I pick a grille that fits my speaker?
Measure the driver's outer diameter and the opening it sits in, then compare both with the dimensions on the model page. Titles often give the size in inches and millimeters, but the screw hole spacing and depth still need checking.
Do these grilles need supports when printing?
It depends on the shape. Flat mesh covers usually print without them, while tall rings and overhanging edges may need support. The author's page often states the orientation and whether supports were used.
Can I scale a grille to fit a different driver?
Scaling changes screw holes, wall thickness and mesh spacing along with the diameter, so the result may not line up. A model with matching dimensions, or an editable parametric file, is usually a better starting point.
What should I check about the material for a car interior?
Look at the material the author lists and think about where the part sits, since dashboards and doors get hot in sunlight. Photos of installed prints show how the chosen material holds up in that position.
Relacionados
Objetos

Car Speaker Grille STL Models for 3D Printing

210538 modelos
Veículos

RAV4 Speaker Grille 3D Models and STL Files

2421 modelos
Eletrônica

Speaker Protective Grilles: 3D Models and STL Files

3781 modelos
Eletrônica

Speaker Protective Grilles: 3D Models and STL Files

1417 modelos
Eletrônica

8-Inch Speaker Grille STL Models to 3D Print

2676 modelos
Eletrônica

Speaker Protective Grilles: 3D Models and STL Files

1314 modelos

Todas as categorias de modelos 3D

O catálogo completo de temas — de casa e utilidades a CNC, com busca em todos os sites conectados.

Abrir o catálogo de categorias