Sport e fitness

Back Bridge and Bridge STL Models for 3D Printing

This collection gathers 3D models that relate to back bridges and bridge shapes in the broadest sense: brackets and replacement parts, model bridges, sci-fi structures and bridging test pieces. It is useful when you need a printable part rather than a drawing, and want to compare how different authors approach the same geometry. Every listing links to an STL or a similar mesh file prepared for 3D printing. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Il testo di questa raccolta è in inglese; la ricerca funziona in qualsiasi lingua.

Una raccolta di Polyzon · 46 modelli da 5 siti

Come è composta questa raccolta

Polyzon compone questa raccolta a partire dai risultati di ricerca dei siti collegati. I doppioni e i modelli senza anteprima vengono rimossi, le corrispondenze deboli finiscono in fondo e il resto mantiene l’ordine dei risultati. I modelli appartengono ai rispettivi autori: verifica le condizioni sulla pagina di ciascun modello.

Criteri di selezione a cura della redazione di Polyzon · Testo aggiornato: 15/10/2026

Vedi la raccolta Mostra tutti: 4280 modelli →
Raccolta

Da dove iniziare

Tutti i modelli di questa raccolta

Mostra tutti: 4280 modelli
Informazioni sulla categoria

«Back Bridge and Bridge STL Models for 3D Printing»

The range is wider than the name suggests. Some entries are functional: brackets, rear covers and damper mounts that replace a broken or missing piece on a scooter, a car dock or a household appliance. Others are scale models — girder, beam and drawbridge designs for railway layouts and brick sets — where the bridge is the subject rather than a structural detail. A third group covers spacecraft, towers and dioramas, and a fourth is made of test prints that deliberately exercise bridging over a gap.

When choosing a model, open the author's page and read what is stated there: overall size and scale, wall thickness at the bridge span, number of separate parts and how they join, and whether the author used supports or printed the span unsupported. Material and settings matter for thin spans — a part that holds in one filament may sag in another. Photos of real prints, rather than renders, show how the underside of a bridge or a curved back piece actually comes out.

If the results feel too narrow, try related wording. "Back bridge" may also be listed as a back arch, back support, spine rest or lumbar piece, while structural parts appear under bracket, mount, rear cover or replacement. For scale work, search by gauge or scale, such as HO, OO or 1:76, and add terms like girder, truss or arch. Bridging tests are usually found under calibration, overhang or test print.

FAQ

Domande frequenti

What does a back bridge model usually look like?
Most are curved or arched pieces: a raised span that supports the back when lying down, or a bracket that follows the shape of the part it replaces. The curve radius and the thickness of the span are the two dimensions that decide how the print behaves.
How do I print a long horizontal span without it sagging?
Check the span length against your nozzle and layer height, and consider splitting the model into parts that join after printing. If the author lists supports or a specific orientation, follow that; otherwise test the span on a small calibration piece first.
Can I scale these models up or down?
Scaling works for solid decorative bridges, but functional brackets and back pieces often have fixed hole sizes and wall thicknesses that change with scale. If you resize, check the fit of screws, clips and mating surfaces before printing the whole part.
Where do I find a bridge for a model railway layout?
Search by gauge or scale together with the structure type — girder, truss, arch or drawbridge. Track width and clearance height are the numbers to compare, since a bridge that fits one gauge will not fit another.
Correlati
Ricerca generale

Bridge 3D Models: STL for Tests, Decor and Miniatures

17868 modelli
Ricerca generale

Back-Themed STL Files: Scratchers, Covers, Props

96289 modelli
Sport e fitness

Back Training 3D Models: STL Devices and Tools

2363 modelli
Utensili e attrezzature

Back Scratcher 3D Models: STL Files for Printing

13384 modelli
Medicina

Back Stretcher STL Files for 3D Printing

3259 modelli
Arte e decorazione

Angel 3D Models: Sculptures and STL Figures

11646 modelli

Tutte le categorie di modelli 3D

Il catalogo completo dei temi, dalla casa alla lavorazione CNC, con ricerca su tutti i siti collegati.

Apri il catalogo delle categorie