ガジェット

Basher 5 VTX Mounts and 3D Printing Parts

This collection gathers STL files for FPV drone hardware built around the Basher 5 frame and similar freestyle quads. It covers VTX and antenna mounts, camera and GPS brackets, connector adapters and protection parts for the frame. The files are useful when you are rebuilding a quad or moving a video transmitter to a new position and need a bracket drawn for 3D printing. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

このコレクションの本文は英語で書かれています。検索自体はどの言語でも使えます。

Polyzonのコレクション · モデル48件 4サイトから収集

このコレクションの選定方法

このコレクションは、Polyzonが対応サイトの検索結果をもとに作成しています。重複やプレビューのないモデルは除外し、関連性の低いものは後ろに回し、それ以外は検索結果の順に並べています。モデルの権利は各作者にあります。利用条件は各モデルのページでご確認ください。

選定基準：Polyzon編集部 · 本文の更新日：2026年10月11日

コレクションを見る モデル89825件をすべて表示 →
コレクション

まずはここから

このコレクションのすべてのモデル

モデル89825件をすべて表示
カテゴリについて

«Basher 5 VTX Mounts and 3D Printing Parts»

The models fall into a few groups. Antenna and VTX mounts hold the transmitter board or the antenna itself, often at a fixed angle. Camera, GPS and air unit brackets place the module on the frame plates, while adapters and pigtails bridge different connector sizes. Protection parts cover arms, battery, and the camera face.

Before printing, compare the mounting pattern with your own hardware: hole spacing, plate thickness and the angle the antenna sits at. Authors usually list the material and settings they used, and photos of finished parts show how the bracket sits on the frame. Parts that clamp an antenna are often drawn for a flexible filament, while rigid brackets use stiffer material.

To widen the search, try the wording used in the titles: video transmitter mount, antenna holder, air unit mount, camera cage, GPS mast, receiver mount. Related frames from the same class of freestyle quads often appear under the same terms, and a mount listed for one frame may be redrawn for another. Combining a part type with a frame name or a connector standard narrows the results quickly.

FAQ

よくある質問

What does a VTX mount do on an FPV drone?
It holds the video transmitter board or its antenna in a fixed position on the frame, so the antenna keeps a steady angle and the board does not move in a crash. Some mounts combine the VTX with the antenna, others hold only the antenna.
Will a mount drawn for one frame work on another?
Only if the hole spacing, plate thickness and antenna angle match your frame. Compare the dimensions on the model page with your own hardware before printing.
Do these parts need supports?
It depends on the geometry: brackets with overhangs or long horizontal arms often need them, flat plates usually do not. The author's notes and photos of printed parts are the quickest way to judge.
Which filament is used for antenna mounts?
Authors commonly list a flexible filament for parts that clamp or absorb vibration, and a rigid filament for brackets that must stay stiff. Check the material note on the model page rather than assuming one choice.
関連
ミリタリー

Basher 5 3D Models: Drone, RC and Bike Parts

モデル98547件
乗り物

Basher 3D Models: RC Bodies, Kitbash Parts

モデル12570件
電子工作

VTX Mounts and Holders for FPV Drone 3D Printing

モデル12134件
電子工作

FPV VTX Mounts and Parts: 3D Models to Print

モデル26851件
ガジェット

FPV Drone VTX Mounts: 3D Models and STL Files

モデル43710件
電子工作

VTX VT-40 3D Models and STL Files for Printing

モデル77142件

3Dモデルのカテゴリ一覧

暮らし・日用品からCNCまで、すべてのテーマをそろえたカタログ。対応サイトを横断して検索できます。

カテゴリ一覧を開く