Pratik gereçler

Basher 5 VTX Mounts and 3D Printing Parts

This collection gathers STL files for FPV drone hardware built around the Basher 5 frame and similar freestyle quads. It covers VTX and antenna mounts, camera and GPS brackets, connector adapters and protection parts for the frame. The files are useful when you are rebuilding a quad or moving a video transmitter to a new position and need a bracket drawn for 3D printing. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 4 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 11.10.2026

Koleksiyonu gör Tümünü göster: 89825 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 89825 model
Kategori hakkında

«Basher 5 VTX Mounts and 3D Printing Parts»

The models fall into a few groups. Antenna and VTX mounts hold the transmitter board or the antenna itself, often at a fixed angle. Camera, GPS and air unit brackets place the module on the frame plates, while adapters and pigtails bridge different connector sizes. Protection parts cover arms, battery, and the camera face.

Before printing, compare the mounting pattern with your own hardware: hole spacing, plate thickness and the angle the antenna sits at. Authors usually list the material and settings they used, and photos of finished parts show how the bracket sits on the frame. Parts that clamp an antenna are often drawn for a flexible filament, while rigid brackets use stiffer material.

To widen the search, try the wording used in the titles: video transmitter mount, antenna holder, air unit mount, camera cage, GPS mast, receiver mount. Related frames from the same class of freestyle quads often appear under the same terms, and a mount listed for one frame may be redrawn for another. Combining a part type with a frame name or a connector standard narrows the results quickly.

FAQ

Sıkça sorulan sorular

What does a VTX mount do on an FPV drone?
It holds the video transmitter board or its antenna in a fixed position on the frame, so the antenna keeps a steady angle and the board does not move in a crash. Some mounts combine the VTX with the antenna, others hold only the antenna.
Will a mount drawn for one frame work on another?
Only if the hole spacing, plate thickness and antenna angle match your frame. Compare the dimensions on the model page with your own hardware before printing.
Do these parts need supports?
It depends on the geometry: brackets with overhangs or long horizontal arms often need them, flat plates usually do not. The author's notes and photos of printed parts are the quickest way to judge.
Which filament is used for antenna mounts?
Authors commonly list a flexible filament for parts that clamp or absorb vibration, and a rigid filament for brackets that must stay stiff. Check the material note on the model page rather than assuming one choice.
İlgili
Askeri

Basher 5 3D Models: Drone, RC and Bike Parts

98547 model
Taşıtlar

Basher 3D Models: RC Bodies, Kitbash Parts

12570 model
Elektronik

VTX Mounts and Holders for FPV Drone 3D Printing

12134 model
Elektronik

FPV VTX Mounts and Parts: 3D Models to Print

26851 model
Pratik gereçler

FPV Drone VTX Mounts: 3D Models and STL Files

43710 model
Elektronik

VTX VT-40 3D Models and STL Files for Printing

77142 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç