電子工作

FPV Antenna Tracker 3D Models and STL Files

This collection gathers 3D-printable parts for FPV antenna trackers, from pan-tilt mechanisms and ground-station cases to antenna holders and GPS mounts. Most files are small enough to print on a common 3D printer, which makes them useful for repairing or rebuilding a ground station. The range covers both complete tracker assemblies and single brackets that fix an antenna to an existing frame. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

このコレクションの本文は英語で書かれています。検索自体はどの言語でも使えます。

Polyzonのコレクション · モデル48件 3サイトから収集

このコレクションの選定方法

このコレクションは、Polyzonが対応サイトの検索結果をもとに作成しています。重複やプレビューのないモデルは除外し、関連性の低いものは後ろに回し、それ以外は検索結果の順に並べています。モデルの権利は各作者にあります。利用条件は各モデルのページでご確認ください。

選定基準：Polyzon編集部 · 本文の更新日：2026年10月13日

コレクションを見る モデル6584件をすべて表示 →
コレクション

まずはここから

このコレクションのすべてのモデル

モデル6584件をすべて表示
カテゴリについて

«FPV Antenna Tracker 3D Models and STL Files»

The models fall into a few groups. Pan-tilt and rotator designs carry servos and move an antenna in two axes, while cases and enclosures hold the tracker electronics and wiring. Simpler parts — antenna holders, SMA nuts, elbows and combined GPS or VTX mounts — attach to an FPV frame or a pair of goggles and do not move on their own. The mechanical designs differ mainly in the servo they accept, the size of the antenna they carry and how the moving parts are joined.

Before printing, read the author's page for the dimensions that matter: servo model and mounting hole spacing, shaft or bearing diameters, the antenna connector type and the overall scale of the assembly. Check whether the model needs supports, how many separate parts it has and how they are fastened together, and look at photos of real prints to judge fit and clearance. The material and settings the author lists are a useful starting point, since brackets that hold servos or clamp antennas see more load than a simple cover.

To find more, try the terms used across this topic: antenna tracker, ground station, pan-tilt, gimbal, rotator and AZEL. Related searches such as antenna mount, GPS mount, VTX holder, goggle antenna and SMA adapter often return parts that fit the same builds. Adding the frame size, the tracker unit or the servo name to a query narrows the results further.

FAQ

よくある質問

What parts does a 3D-printed FPV antenna tracker usually include?
Typical sets contain a pan-tilt or rotator mechanism, a base or case for the electronics, and a bracket that holds the antenna. Some designs are split into several parts that are screwed or bolted together.
How do I know which servo fits a tracker model?
The author's description usually names the servo and gives the mounting hole spacing and shaft size. Compare those figures with the servo you have before printing the moving parts.
Do these models need supports?
It depends on the shape. Flat brackets and covers often print without them, while curved housings and overhanging arms may need supports. Check the author's notes and the orientation shown in the photos.
Can a printed tracker hold a large antenna?
Size and weight limits come from the design and the hardware it uses. Look at the stated antenna dimensions, the wall thickness of the clamping parts and any bearings or shafts the model is built around.
関連
電子工作

3D Printed Antennas: Yagi, Helix and Mount STL Files

モデル26986件
電子工作

3D Models for Antenna Stations and Ground Gear

モデル2772件
電子工作

2m Antenna 3D Models: Yagi, Moxon and Ground Plane STL

モデル1520件
電子工作

VHF Antenna 3D Models and STL Files for Ham Radio

モデル8046件
電子工作

Dipole Antenna STL Parts and Mounts

モデル3057件
電子工作

Pan and Antenna Systems: 3D Models and STL Files

モデル3852件

3Dモデルのカテゴリ一覧

暮らし・日用品からCNCまで、すべてのテーマをそろえたカタログ。対応サイトを横断して検索できます。

カテゴリ一覧を開く