电子产品

FPV Antenna Tracker 3D Models and STL Files

This collection gathers 3D-printable parts for FPV antenna trackers, from pan-tilt mechanisms and ground-station cases to antenna holders and GPS mounts. Most files are small enough to print on a common 3D printer, which makes them useful for repairing or rebuilding a ground station. The range covers both complete tracker assemblies and single brackets that fix an antenna to an existing frame. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

本合集的文字为英文，搜索本身支持任何语言。

Polyzon合集 · 48个模型 来自3个平台

合集是如何整理的

此合集由Polyzon根据已接入平台的搜索结果整理而成：去除重复项和没有预览图的模型，匹配度低的排在最后，其余按搜索结果顺序排列。模型归作者所有——请在各模型页面查看使用条款。

筛选规则：Polyzon编辑部 · 文字更新于2026年10月13日

查看合集 查看全部6584个模型 →
合集

从这里开始

合集中的全部模型

查看全部6584个模型
关于此分类

«FPV Antenna Tracker 3D Models and STL Files»

The models fall into a few groups. Pan-tilt and rotator designs carry servos and move an antenna in two axes, while cases and enclosures hold the tracker electronics and wiring. Simpler parts — antenna holders, SMA nuts, elbows and combined GPS or VTX mounts — attach to an FPV frame or a pair of goggles and do not move on their own. The mechanical designs differ mainly in the servo they accept, the size of the antenna they carry and how the moving parts are joined.

Before printing, read the author's page for the dimensions that matter: servo model and mounting hole spacing, shaft or bearing diameters, the antenna connector type and the overall scale of the assembly. Check whether the model needs supports, how many separate parts it has and how they are fastened together, and look at photos of real prints to judge fit and clearance. The material and settings the author lists are a useful starting point, since brackets that hold servos or clamp antennas see more load than a simple cover.

To find more, try the terms used across this topic: antenna tracker, ground station, pan-tilt, gimbal, rotator and AZEL. Related searches such as antenna mount, GPS mount, VTX holder, goggle antenna and SMA adapter often return parts that fit the same builds. Adding the frame size, the tracker unit or the servo name to a query narrows the results further.

FAQ

常见问题

What parts does a 3D-printed FPV antenna tracker usually include?
Typical sets contain a pan-tilt or rotator mechanism, a base or case for the electronics, and a bracket that holds the antenna. Some designs are split into several parts that are screwed or bolted together.
How do I know which servo fits a tracker model?
The author's description usually names the servo and gives the mounting hole spacing and shaft size. Compare those figures with the servo you have before printing the moving parts.
Do these models need supports?
It depends on the shape. Flat brackets and covers often print without them, while curved housings and overhanging arms may need supports. Check the author's notes and the orientation shown in the photos.
Can a printed tracker hold a large antenna?
Size and weight limits come from the design and the hardware it uses. Look at the stated antenna dimensions, the wall thickness of the clamping parts and any bearings or shafts the model is built around.
相关
电子产品

3D Printed Antennas: Yagi, Helix and Mount STL Files

26986个模型
电子产品

3D Models for Antenna Stations and Ground Gear

2772个模型
电子产品

2m Antenna 3D Models: Yagi, Moxon and Ground Plane STL

1520个模型
电子产品

VHF Antenna 3D Models and STL Files for Ham Radio

8046个模型
电子产品

Dipole Antenna STL Parts and Mounts

3057个模型
电子产品

Pan and Antenna Systems: 3D Models and STL Files

3852个模型

全部3D模型分类

完整的主题目录：从家居日用到CNC，均可在已接入的来源平台中搜索。

查看分类目录