電子工作

FPV Drone Motor Mounts: 3D Models and STL Files

This collection gathers STL files for FPV drone motor mounts: wall hangers, adapter plates, frame brackets and clamps. It helps when you need to replace a broken part, keep a drone on a wall or move a motor to another bolt pattern. Each listing is only a starting point for 3D printing, so the result depends on the measurements you take from your own hardware. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

このコレクションの本文は英語で書かれています。検索自体はどの言語でも使えます。

Polyzonのコレクション · モデル48件 5サイトから収集

このコレクションの選定方法

このコレクションは、Polyzonが対応サイトの検索結果をもとに作成しています。重複やプレビューのないモデルは除外し、関連性の低いものは後ろに回し、それ以外は検索結果の順に並べています。モデルの権利は各作者にあります。利用条件は各モデルのページでご確認ください。

選定基準：Polyzon編集部 · 本文の更新日：2026年10月12日

コレクションを見る モデル254000件をすべて表示 →
コレクション

まずはここから

このコレクションのすべてのモデル

モデル254000件をすべて表示
カテゴリについて

«FPV Drone Motor Mounts: 3D Models and STL Files»

Wall hangers and display mounts hold a complete drone or a set of motors on a vertical surface, while adapter plates and frame brackets sit between the motor and the arm. Grippers and clamps are bench parts that hold a motor during soldering or testing. The difference shows up in load direction: a hanger carries weight in one plane, a motor mount carries thrust and vibration.

Before printing, measure the bolt hole spacing and hole diameter on your motor, the motor can diameter and the screw length you plan to use. Check the author's page for wall thickness, number of parts, whether supports are needed, and the material and settings listed there. Photos of real prints show how the part behaves around screw holes and thin sections.

To narrow the search, try synonyms such as motor hanger, motor adapter, brushless mount, frame bracket or wall holder, and combine them with the frame size or motor class you use. Related topics — camera mounts, GPS mounts, landing pads, prop guards — often appear in the same results and can share the same hardware.

FAQ

よくある質問

What measurements do I need before printing a motor mount?
Note the bolt hole spacing and hole diameter, the motor can diameter, the arm thickness and the screw length you have. Compare these with the dimensions listed on the model page, since small differences change how the part sits.
Do these mounts need supports?
It depends on the geometry: flat plates usually print without them, while brackets with overhangs or closed screw channels may need them. The author's page and print photos usually show the orientation that was used.
Which material works for a motor mount?
Rigid filaments keep screw holes and flat faces stable, while softer ones absorb some vibration and grip better in clamps. Check which material and settings the author lists, and match it to the load the part will carry.
Can a mount be adapted to a different bolt pattern?
Adapter plates exist for moving between common square patterns, and some models include several hole sets in one part. Scaling a model changes hole spacing and screw clearance, so verify the dimensions instead of resizing blindly.
関連
ホビー・ものづくり

FPV Drone Motor Mounts: 3D Models and STL Files

モデル250095件
電子工作

7-Inch FPV Drone STL Models and Printable Parts

モデル13098件
オブジェクト

3-Inch FPV Drone STL Models and Printed Frames

モデル13693件
乗り物

FPV Drone 3D Models: Frames, Propellers and Parts

モデル354278件
電子工作

FPV Motor Protection 3D Models and STL Files

モデル83713件
電子工作

9-Inch FPV Drone Frames: 3D Models and STL Files

モデル5058件

3Dモデルのカテゴリ一覧

暮らし・日用品からCNCまで、すべてのテーマをそろえたカタログ。対応サイトを横断して検索できます。

カテゴリ一覧を開く