Elektronik

FPV Drone Motor Mounts: 3D Models and STL Files

This collection gathers STL files for FPV drone motor mounts: wall hangers, adapter plates, frame brackets and clamps. It helps when you need to replace a broken part, keep a drone on a wall or move a motor to another bolt pattern. Each listing is only a starting point for 3D printing, so the result depends on the measurements you take from your own hardware. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 5 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 12.10.2026

Koleksiyonu gör Tümünü göster: 254000 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 254000 model
Kategori hakkında

«FPV Drone Motor Mounts: 3D Models and STL Files»

Wall hangers and display mounts hold a complete drone or a set of motors on a vertical surface, while adapter plates and frame brackets sit between the motor and the arm. Grippers and clamps are bench parts that hold a motor during soldering or testing. The difference shows up in load direction: a hanger carries weight in one plane, a motor mount carries thrust and vibration.

Before printing, measure the bolt hole spacing and hole diameter on your motor, the motor can diameter and the screw length you plan to use. Check the author's page for wall thickness, number of parts, whether supports are needed, and the material and settings listed there. Photos of real prints show how the part behaves around screw holes and thin sections.

To narrow the search, try synonyms such as motor hanger, motor adapter, brushless mount, frame bracket or wall holder, and combine them with the frame size or motor class you use. Related topics — camera mounts, GPS mounts, landing pads, prop guards — often appear in the same results and can share the same hardware.

FAQ

Sıkça sorulan sorular

What measurements do I need before printing a motor mount?
Note the bolt hole spacing and hole diameter, the motor can diameter, the arm thickness and the screw length you have. Compare these with the dimensions listed on the model page, since small differences change how the part sits.
Do these mounts need supports?
It depends on the geometry: flat plates usually print without them, while brackets with overhangs or closed screw channels may need them. The author's page and print photos usually show the orientation that was used.
Which material works for a motor mount?
Rigid filaments keep screw holes and flat faces stable, while softer ones absorb some vibration and grip better in clamps. Check which material and settings the author lists, and match it to the load the part will carry.
Can a mount be adapted to a different bolt pattern?
Adapter plates exist for moving between common square patterns, and some models include several hole sets in one part. Scaling a model changes hole spacing and screw clearance, so verify the dimensions instead of resizing blindly.
İlgili
Hobi ve kendin yap

FPV Drone Motor Mounts: 3D Models and STL Files

250095 model
Elektronik

7-Inch FPV Drone STL Models and Printable Parts

13098 model
Nesneler

3-Inch FPV Drone STL Models and Printed Frames

13693 model
Taşıtlar

FPV Drone 3D Models: Frames, Propellers and Parts

354278 model
Elektronik

FPV Motor Protection 3D Models and STL Files

83713 model
Elektronik

9-Inch FPV Drone Frames: 3D Models and STL Files

5058 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç